Yellow-Toned Partial-Thread Deck Screw — Long yellow-toned screws shown with countersunk cross-drive heads, smooth upper shanks, coarse lower threads and pointed ends. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Long yellow-toned screws shown with countersunk cross-drive heads, smooth upper shanks, coarse lower threads and pointed ends. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Yellow-Toned Partial-Thread Deck Screw |
|---|---|
| Current Product Configuration | Long yellow-toned screws shown with countersunk cross-drive heads, smooth upper shanks, coarse lower threads and pointed ends. |
| Primary Form | Partial-thread wood or deck screw intended to draw confirmed timber members together while seating the head in the outer member. |
| Head / Interface | Confirm head diameter and angle, cross-drive type and depth, under-head transition, smooth-shank diameter and countersink condition. |
| Thread / Mating Part | Confirm diameter, coarse thread form and pitch, threaded length, unthreaded shank, point geometry, pilot hole, timber species and engagement. |
| Current Appearance | Yellow-toned metallic finish is shown; confirm base material, finish system, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm timber species and condition, member thicknesses, joint section, pilot and clearance holes, edge and end distances, driver and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Deck-board fastening | Match shank, thread, point and pilot holes to the approved timber joint. |
|---|---|
| Timber frame assembly | Confirm clamp section, member thicknesses and engagement. |
| Outdoor wood fixtures | State exposure and corrosion requirements for the approved finish. |
| OEM wood-fastener packs | Control length variants, count, labels and installation guidance. |
Buyer Guide
| Why is the upper shank unthreaded? | Confirm the joint section and required clamping behavior before specifying thread and shank lengths. |
|---|---|
| How are pilot holes selected? | Use the actual timber, screw geometry, edge distances and approved driving trial. |
| Does the yellow color define corrosion performance? | No. Confirm the coating process, color range, exposure and corrosion requirement. |
| Can the photographed length define production? | No. Confirm every dimension by drawing, sample or purchase specification. |
Quality Control
| Head and shank | Inspect head geometry, drive, shank diameter, straightness and transitions. |
|---|---|
| Thread and point | Check form, pitch, length, point and surface damage. |
| Timber-joint trial | Verify pilot holes, driving, clamping, seating and buyer-specified test. |
| Finish and pack audit | Confirm color, surface, size identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Why is the upper shank unthreaded? | Confirm the joint section and required clamping behavior before specifying thread and shank lengths. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, shank, thread, point and dimensions |
| RFQ 3 | Timber species, member thicknesses and joint section |
| RFQ 4 | Pilot holes, edge distances and installation method |
| RFQ 5 | Material, coating and corrosion requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
