Silver Decorative Disc-Head Self-Tapping Screw — Bright silver-colored screws shown with broad low disc heads, cross drives, pointed ends and coarse self-tapping threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored screws shown with broad low disc heads, cross drives, pointed ends and coarse self-tapping threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Decorative Disc-Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Bright silver-colored screws shown with broad low disc heads, cross drives, pointed ends and coarse self-tapping threads. |
| Primary Form | Decorative wide-head self-tapping screw intended to clamp a visible panel or trim surface to a confirmed substrate. |
| Head / Interface | Confirm disc-head diameter, thickness and edge profile, cross-drive type and depth, bearing face, washer requirement and visible seating condition. |
| Thread / Mating Part | Confirm diameter, self-tapping thread form and pitch, threaded length, point geometry, pilot hole, substrate and required engagement. |
| Current Appearance | Bright polished silver-colored surfaces are shown; confirm base material, finish, gloss, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm facing material, substrate, joint stack, pilot and clearance holes, driver, seating condition, edge distances and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Decorative furniture panels | Approve visible head diameter, surface and seating. |
|---|---|
| Cabinet trim fastening | Match point, thread and pilot hole to the confirmed substrate. |
| Display and fixture assembly | Confirm clamp area, driver access and joint stack. |
| OEM visible-fastener programs | Control finish samples, variants, count, labels and protection. |
Buyer Guide
| What makes this a decorative head? | The photographed configuration has a broad visible disc head; final diameter, profile and surface require approval. |
|---|---|
| Which substrate data are needed? | Provide substrate material and thickness, joint stack, pilot and clearance holes and engagement. |
| Can the photographed size define production? | No. Confirm every dimension and tolerance by drawing, sample or purchase specification. |
| How is the visible finish approved? | Use an approved finish sample and state color, gloss, surface and corrosion requirements. |
Quality Control
| Disc head and drive | Inspect diameter, profile, edge, recess, bearing face and visible defects. |
|---|---|
| Thread and point | Check form, pitch, length, point, straightness and damage. |
| Substrate trial | Verify pilot hole, driving, seating, clamp and buyer-specified evaluation. |
| Finish and pack audit | Confirm surface appearance, variant identity, count, labels and scratch protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| What makes this a decorative head? | The photographed configuration has a broad visible disc head; final diameter, profile and surface require approval. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Disc-head profile, drive, thread, point and tolerances |
| RFQ 3 | Facing material, substrate and joint stack |
| RFQ 4 | Pilot and clearance holes and installation method |
| RFQ 5 | Material, finish, gloss and corrosion requirement |
| RFQ 6 | Quantity, labels and protective packaging |
MOQ: 10,000 pcs per confirmed specification
