Partially Threaded Deck Screw — Long pointed screws shown with low countersunk-style heads, internal star drives, coarse partial threads and black or yellow-toned appearances. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Long pointed screws shown with low countersunk-style heads, internal star drives, coarse partial threads and black or yellow-toned appearances. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Partially Threaded Deck Screw |
|---|---|
| Current Product Configuration | Long pointed screws shown with low countersunk-style heads, internal star drives, coarse partial threads and black or yellow-toned appearances. |
| Primary Form | Partially threaded wood or deck screw intended to draw a confirmed timber joint together while the unthreaded shank passes through the upper member. |
| Head / Interface | Confirm head diameter, angle and height, star-drive type and depth, under-head transition, shank diameter, recess and driver access. |
| Thread / Mating Part | Confirm thread diameter and form, pitch, threaded length, unthreaded shank length, point geometry, pilot-hole requirement and timber engagement. |
| Current Appearance | Black and yellow-toned examples are shown; confirm base material, coating system, appearance range, service environment and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm timber species and condition, member thicknesses, clearance and pilot holes, edge and end distances, driver and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Timber member assembly | Coordinate shank clearance, thread engagement and member thicknesses. |
|---|---|
| Deck and outdoor wood joints | Confirm coating, environment, pilot holes and joint design. |
| Wood-to-bracket fastening | Match the head, bracket hole, timber and engagement. |
| OEM deck-screw packs | Control finish variants, counts, labels and coating protection. |
Buyer Guide
| Why is the screw partially threaded? | Approve the shank and thread lengths against the two timber members and intended clamping action. |
|---|---|
| Which timber data are required? | Provide species or panel type, condition, member thicknesses, hole preparation and joint section. |
| Can black and yellow-toned coatings be mixed? | Define each coating, quantity, item code and packaging group in the approved specification. |
| Can outdoor performance be inferred from the image? | No. State the exposure, coating requirement and buyer-specified test method. |
Quality Control
| Head, drive and shank | Inspect head profile, recess, shank diameter, straightness and burrs. |
|---|---|
| Partial thread and point | Check diameter, form, pitch, thread length, point and damage. |
| Timber-joint trial | Verify clearance, entry, draw-up, seating and buyer-specified test. |
| Coating and pack audit | Confirm variant, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Why is the screw partially threaded? | Approve the shank and thread lengths against the two timber members and intended clamping action. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, shank, thread and point specification |
| RFQ 3 | Timber materials and member thicknesses |
| RFQ 4 | Clearance hole, pilot hole, edge distance and installation |
| RFQ 5 | Material, coating and exposure requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
