Silver Torx Button Head Thread-Forming Screw — Silver screws shown with a low rounded button-style head, internal Torx drive, coarse thread and blunt or tapered forming end. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver screws shown with a low rounded button-style head, internal Torx drive, coarse thread and blunt or tapered forming end. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Torx Button Head Thread-Forming Screw |
|---|---|
| Current Product Configuration | Silver screws shown with a low rounded button-style head, internal Torx drive, coarse thread and blunt or tapered forming end. |
| Primary Form | Low rounded button head with an internal Torx recess and coarse thread-forming profile shown. |
| Head / Interface | Confirm head diameter and height, bearing face, Torx recess and bit, surrounding clearance and driver access. |
| Thread / Mating Part | Coarse thread-forming profile shown; confirm diameter, pitch or form, end geometry, prepared hole, substrate and engagement. |
| Current Appearance | Bright silver metallic appearance shown; confirm base material, finish system, visual acceptance and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm metal, plastic or approved substrate, prepared-hole diameter and depth, joint stack, engagement, driver and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags or private-label packs can be reviewed with approved sizes, bit identification, labels and carton protection. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Prepared-hole component assembly | Match thread form and hole to the actual substrate. |
|---|---|
| Low-profile bracket fastening | Confirm head clearance, bearing face and driver access. |
| Plastic or light-metal assemblies | Validate hole formation, engagement and material condition by trial. |
| OEM threaded-fastener packs | Control size, thread form, count, bit identification and labels. |
Buyer Guide
| How is the prepared hole selected? | Use the confirmed thread form, substrate, thickness, engagement and installation trial. |
|---|---|
| Is this a standard machine screw? | The photographed thread appears forming-style; final subtype and mating-hole requirement need drawing or sample confirmation. |
| Which Torx bit is required? | Confirm the recess geometry and bit size from the approved sample or drawing. |
| Can tightening performance be inferred from the image? | No. Define the substrate, hole, driver and acceptance method. |
Quality Control
| Button head and Torx drive | Inspect head profile, bearing face, recess geometry and bit fit. |
|---|---|
| Thread-forming profile | Check diameter, form, completeness, end geometry and straightness. |
| Prepared-hole trial | Verify entry, thread formation, seating, substrate condition and removal. |
| Finish and pack audit | Inspect appearance, size identity, count, label and surface protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags or private-label packs can be reviewed with approved sizes, bit identification, labels and carton protection. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| How is the prepared hole selected? | Use the confirmed thread form, substrate, thickness, engagement and installation trial. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags or private-label packs can be reviewed with approved sizes, bit identification, labels and carton protection. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved samples |
|---|---|
| RFQ 2 | Button head and Torx recess geometry |
| RFQ 3 | Thread-forming profile and end geometry |
| RFQ 4 | Substrate, prepared hole, joint stack and engagement |
| RFQ 5 | Material, finish and installation test method |
| RFQ 6 | Quantity, size marking, label and packaging |
MOQ: 10,000 pcs per confirmed specification
