Three-Part Cam Lock and Connector Bolt Set — Metal eccentric cam, cylindrical connector bolt and white polymer insert shown in separated and assembled configurations. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam, cylindrical connector bolt and white polymer insert shown in separated and assembled configurations. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Three-Part Cam Lock and Connector Bolt Set |
|---|---|
| Current Product Configuration | Metal eccentric cam, cylindrical connector bolt and white polymer insert shown in separated and assembled configurations. |
| Primary Form | Three-part furniture connector using a cam, a shaped connector bolt and a polymer mating insert. |
| Head / Interface | Confirm cam capture form, bolt head, neck, shank and shoulders, insert bore and retention, and component projection. |
| Thread / Mating Part | Threaded bolt end shown; confirm diameter, pitch, tolerance, length, mating insert and required engagement. |
| Current Appearance | Bright metallic cam and bolt with a white insert shown; confirm metal grades and finishes, insert resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm face bore, edge hole, insert hole, centerlines, panel thickness, bolt projection, cam direction and assembly order. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched three-part sets or compartment kits can be reviewed with approved ratios, item codes and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Three-part cabinet joints | Coordinate all interfaces and drilling as one approved assembly. |
|---|---|
| Flat-pack furniture systems | Control installation sequence, matched counts and instructions. |
| Panel joints with a polymer insert | Verify insert retention, bolt engagement and panel condition. |
| Replacement connector sets | Compare every original component and panel hole. |
Buyer Guide
| Which parts must be reviewed together? | The cam, connector bolt, insert and drilled panels form one functional system. |
|---|---|
| How is the insert paired with the bolt? | Confirm bore, mating thread or retention form, hole and engagement. |
| What controls cam capture? | Bolt-head shape, neck, projection, cam cavity and centerline work together. |
| What should an assembly sample include? | Use final components and production-representative panels and holes. |
Quality Control
| Component geometry | Inspect cam cavity, bolt interfaces, insert bore and retention form. |
|---|---|
| Thread and projection | Check thread, shoulders, shank, straightness and installed position. |
| Panel assembly trial | Verify holes, insertion, capture, joint pull-up and release. |
| Kit verification | Check ratio, item identity, instructions, label and compartments. |
Packaging & Customization
| Packaging Format | Matched three-part sets or compartment kits can be reviewed with approved ratios, item codes and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which parts must be reviewed together? | The cam, connector bolt, insert and drilled panels form one functional system. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched three-part sets or compartment kits can be reviewed with approved ratios, item codes and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete component drawings or samples |
|---|---|
| RFQ 2 | Cam and connector-head interface |
| RFQ 3 | Bolt thread, shoulders and installed projection |
| RFQ 4 | Panel material, thickness, holes and centerlines |
| RFQ 5 | Metal finishes, insert resin and test method |
| RFQ 6 | Set quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
