Furniture Cam Lock with Connector Bolt and Insert — Metal eccentric cam, long connector bolt and white polymer insert shown as separate and assembled furniture connector components. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam, long connector bolt and white polymer insert shown as separate and assembled furniture connector components. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Furniture Cam Lock with Connector Bolt and Insert |
|---|---|
| Current Product Configuration | Metal eccentric cam, long connector bolt and white polymer insert shown as separate and assembled furniture connector components. |
| Primary Form | Three-component panel connector using a cam to capture the shaped end of a bolt supported by a polymer insert. |
| Head / Interface | Confirm cam cavity, bolt head and neck, shank, shoulders, insert bore and retention, and installed projection. |
| Thread / Mating Part | Threaded bolt end shown; confirm thread form, diameter, pitch, length, mating insert or panel and engagement. |
| Current Appearance | Bright metallic cam and bolt with a white insert shown; confirm metal materials and finishes, insert resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, insert hole, centerlines, bolt projection, cam orientation and assembly order. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-bolt-insert sets or compartment kits can be reviewed with controlled component ratios, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet panel connections | Coordinate cam access, bolt projection, insert location and panel-hole centerline. |
|---|---|
| Knock-down furniture kits | Control component sequence, matched count and installation instructions. |
| Replacement connector programs | Compare all original parts and drilled panels before approval. |
| OEM hardware packs | Separate the three components by item code, ratio and compartment. |
Buyer Guide
| Can one component be replaced independently? | Only after its interfaces with the other components and panel holes are revalidated. |
|---|---|
| How is the insert specified? | Confirm outside profile, bore, retention, material, color and installation hole. |
| What controls bolt projection? | Thread engagement, shoulders, insert position, panel section and cam-head interface work together. |
| Can joint strength be inferred from the photo? | No. Define the complete panel joint and test method. |
Quality Control
| Cam, bolt and insert | Inspect every mating profile, shoulder, thread and retention feature. |
|---|---|
| Panel-hole fit | Verify cam bore, insert hole, edge drilling and centerline relationship. |
| Assembly sequence | Check insertion, engagement, capture, closing, pull-up and release. |
| Set audit | Verify component ratio, item identity, instructions, label and compartments. |
Packaging & Customization
| Packaging Format | Matched cam-bolt-insert sets or compartment kits can be reviewed with controlled component ratios, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Can one component be replaced independently? | Only after its interfaces with the other components and panel holes are revalidated. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-bolt-insert sets or compartment kits can be reviewed with controlled component ratios, labels and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete set drawings or approved samples |
|---|---|
| RFQ 2 | Cam, bolt and insert interface details |
| RFQ 3 | Thread, shoulders and installed projection |
| RFQ 4 | Panel material, thickness, holes and centerlines |
| RFQ 5 | Metal finishes, insert resin and joint test |
| RFQ 6 | Set quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
