Hex-Socket Male-Female Furniture Connector Set — Silver-colored connector sets shown with a flanged internally threaded female sleeve and a matching hex-socket male screw. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored connector sets shown with a flanged internally threaded female sleeve and a matching hex-socket male screw. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Hex-Socket Male-Female Furniture Connector Set |
|---|---|
| Current Product Configuration | Silver-colored connector sets shown with a flanged internally threaded female sleeve and a matching hex-socket male screw. |
| Primary Form | Two-part connector intended to clamp prepared furniture panels or frames through a through-hole or aligned bore system. |
| Head / Interface | Confirm both head diameters and profiles, hex-socket sizes, female-sleeve outside diameter, knurl or anti-rotation detail, grip range and seating faces. |
| Thread / Mating Part | Confirm male and female thread diameter, pitch and class, internal thread depth, engagement, end clearance and assembly torque method. |
| Current Appearance | Bright silver-colored metallic surface is shown; confirm materials for both parts, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both workpiece materials and thicknesses, through-hole diameters, counterbores, grip stack, insertion direction, tools and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Panel-to-panel furniture joints | Match sleeve length, grip stack and through holes to the approved joint. |
|---|---|
| Bed and frame assembly | Confirm access from both sides and the required tightening method. |
| Upholstered furniture hardware | Coordinate head seating, fabric or foam clearance and panel stack. |
| OEM connector pairs | Control male-to-female ratio, lengths, labels and surface protection. |
Buyer Guide
| Which panel data are required? | Provide both materials, thicknesses, hole diameters, counterbores and the complete grip stack. |
|---|---|
| How is the connector length selected? | Approve sleeve length, male engagement and end clearance against the assembled joint. |
| Can the male or female part be supplied separately? | State the required component, thread, quantity and packaging ratio in the purchase specification. |
| Can a torque value be assumed? | No. State the materials, joint, driver and buyer-specified tightening test. |
Quality Control
| Male and female heads | Inspect profiles, sockets, seating faces, burrs and visible defects. |
|---|---|
| Mating threads and sleeve | Check diameter, pitch, class, internal depth, outside profile and engagement. |
| Panel joint trial | Verify insertion, anti-rotation behavior, grip, seating and buyer-specified test. |
| Finish and pack audit | Confirm matched pairs, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which panel data are required? | Provide both materials, thicknesses, hole diameters, counterbores and the complete grip stack. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Male and female drawings or approved samples |
|---|---|
| RFQ 2 | Thread, sleeve and head specifications |
| RFQ 3 | Panel materials, holes, counterbores and grip stack |
| RFQ 4 | Installation direction, tools and test criteria |
| RFQ 5 | Materials, finish and corrosion requirement |
| RFQ 6 | Quantity, component ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
