Stamped Folding Furniture Hinge Plates — Small stamped metal hinge or folding-link plates shown in black, yellow-toned and silver-colored finishes with multiple mounting holes. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Small stamped metal hinge or folding-link plates shown in black, yellow-toned and silver-colored finishes with multiple mounting holes. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Stamped Folding Furniture Hinge Plates |
|---|---|
| Current Product Configuration | Small stamped metal hinge or folding-link plates shown in black, yellow-toned and silver-colored finishes with multiple mounting holes. |
| Primary Form | Two-leaf stamped furniture hardware component joined at a pivot and secured through prepared mounting holes. |
| Head / Interface | Confirm leaf outlines, bends, pivot axis, open and closed positions, hole number and spacing, offsets, thickness and edge clearances. |
| Thread / Mating Part | No integral thread is visible; confirm mounting screws, rivets or pins and the complete mating assembly separately. |
| Current Appearance | Black, yellow-toned and silver-colored examples are shown; confirm base material, finish process, approved color and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm furniture parts, mounting faces, hole pattern, fasteners, opening direction, movement envelope and buyer cycle or load test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Folding furniture mechanisms | Coordinate pivot, travel and mounting faces with the approved assembly. |
|---|---|
| Cabinet and box hardware | Confirm opening direction, clearance and fastener access. |
| Replacement stamped hinges | Compare both leaves, pivot, bends, holes and installed position. |
| OEM hardware bags | Control finish variant, matched quantity, fasteners and labels. |
Buyer Guide
| Which geometry controls fit? | Provide both leaf profiles, bends, pivot, holes, thickness and open-closed positions. |
|---|---|
| Are mounting fasteners included? | Define screw, rivet or pin type, quantity and packaging separately. |
| Can finish be selected by photograph? | No. Confirm material, process, color sample and service condition. |
| What movement test is required? | State travel, interference, cycle or load criteria for the actual assembly. |
Quality Control
| Stamped leaves | Inspect outline, bends, thickness, holes, burrs and visible surface. |
|---|---|
| Pivot joint | Check axis, retention, movement, play and interference. |
| Assembly trial | Verify mounting pattern, travel, clearances and buyer-specified test. |
| Variant and pack audit | Confirm finish, matched pieces, fasteners, count and labels. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which geometry controls fit? | Provide both leaf profiles, bends, pivot, holes, thickness and open-closed positions. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Hinge drawing or approved sample |
|---|---|
| RFQ 2 | Leaf profiles, bends, pivot and positions |
| RFQ 3 | Hole pattern, thickness and mounting faces |
| RFQ 4 | Fasteners and mating furniture parts |
| RFQ 5 | Material, finish and movement test |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification