Furniture Cam Lock and Double-Ended Connector Bolt — Metal eccentric cam, long double-ended connector bolt and white polymer insert shown as a matched furniture set. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam, long double-ended connector bolt and white polymer insert shown as a matched furniture set. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Furniture Cam Lock and Double-Ended Connector Bolt |
|---|---|
| Current Product Configuration | Metal eccentric cam, long double-ended connector bolt and white polymer insert shown as a matched furniture set. |
| Primary Form | Panel connector set using an eccentric cam and a long bolt with distinct cam-head and threaded-end interfaces. |
| Head / Interface | Confirm cam recess and capture path, bolt head, neck, shank, shoulders, insert bore and installed projection. |
| Thread / Mating Part | Threaded sections shown at the bolt ends; confirm each diameter, pitch, length, mating part and engagement. |
| Current Appearance | Bright metallic cam and bolt with a white insert shown; confirm metal materials and finishes, insert resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, cam face bore, edge hole, insert location, centerline, bolt projection, cam orientation and tightening sequence. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-bolt-insert sets or compartment packs can be reviewed with approved ratios, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Long connector furniture joints | Confirm shank clearance, panel spacing and installed projection. |
|---|---|
| Cabinet and shelving assemblies | Coordinate bore, edge drilling, insert and cam orientation. |
| Furniture connector replacement | Compare all mating components and panel-hole positions. |
| OEM hardware kits | Control the component ratio, thread identity, instruction and packaging. |
Buyer Guide
| Why are both bolt ends important? | Each end serves a different interface; head capture, thread and projection must all match. |
|---|---|
| How is the insert paired with the bolt? | Confirm bore, mating thread or retention form, installation hole and required engagement. |
| Can bolt length be chosen from panel thickness alone? | No. Include shank clearance, shoulders, insert position and cam-head projection. |
| What should a fit sample contain? | Use the final cam, bolt, insert and production-representative drilled panels. |
Quality Control
| Cam interface | Inspect recess, capture path, body dimensions and orientation. |
|---|---|
| Connector bolt | Check both ends, threads, shoulders, shank, straightness and finish. |
| Insert and panel fit | Verify insert retention, hole fit, bolt engagement and centerline. |
| Joint and pack trial | Test closing and release, then verify matched count and labeling. |
Packaging & Customization
| Packaging Format | Matched cam-bolt-insert sets or compartment packs can be reviewed with approved ratios, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Why are both bolt ends important? | Each end serves a different interface; head capture, thread and projection must all match. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-bolt-insert sets or compartment packs can be reviewed with approved ratios, labels and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam, bolt and insert drawings or samples |
|---|---|
| RFQ 2 | Cam-head capture and bolt-end interfaces |
| RFQ 3 | Thread details, shoulders and installed projection |
| RFQ 4 | Panel material, thickness, holes and centerlines |
| RFQ 5 | Metal finishes, insert resin and test method |
| RFQ 6 | Set quantity, ratio, instruction and packaging |
MOQ: 10,000 pcs per confirmed specification
