Self-Tapping Metal Shelf Support Peg — Small bright metal shelf pegs shown with pointed coarse panel threads, short shoulders and smooth cylindrical support bodies. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Small bright metal shelf pegs shown with pointed coarse panel threads, short shoulders and smooth cylindrical support bodies. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Self-Tapping Metal Shelf Support Peg |
|---|---|
| Current Product Configuration | Small bright metal shelf pegs shown with pointed coarse panel threads, short shoulders and smooth cylindrical support bodies. |
| Primary Form | Threaded shelf support peg that installs into a confirmed cabinet panel and presents a cylindrical bearing support for a shelf. |
| Head / Interface | Confirm support-body diameter and length, shoulder, bearing face, end profile, panel clearance and shelf contact geometry. |
| Thread / Mating Part | Confirm panel-engagement thread, pitch or form, threaded length, point, pilot-hole requirement, panel material and installed projection. |
| Current Appearance | Bright silver-colored metal is shown; confirm base material, finish, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and thickness, hole diameter and depth, edge distance, insertion tool or driver, shelf interface and buyer-specified fit test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf support | Match the peg, panel hole and shelf edge to the approved assembly. |
|---|---|
| Bookcase and storage furniture | Confirm panel thickness, spacing and installed projection. |
| Replacement shelf-pin programs | Compare body, thread, hole and shelf contact with approved samples. |
| OEM counted hardware bags | Control peg identity, count, labels and surface protection. |
Buyer Guide
| Which panel-hole data are required? | Provide panel material, thickness, hole diameter and depth, spacing and tolerances. |
|---|---|
| How is the support body selected? | Match diameter, length, projection and bearing face to the actual shelf interface. |
| Can the photographed size define production? | No. Confirm every dimension by drawing or approved sample. |
| How is installation approved? | Use production-representative panels and shelves for insertion, fit and buyer-specified testing. |
Quality Control
| Support body | Inspect diameter, length, shoulder, bearing face and visible surface. |
|---|---|
| Panel thread and point | Check form, length, point, straightness and damage. |
| Panel-and-shelf trial | Verify insertion, projection, shelf contact and buyer-specified fit test. |
| Pack audit | Confirm variant identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which panel-hole data are required? | Provide panel material, thickness, hole diameter and depth, spacing and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Peg drawing or approved sample |
|---|---|
| RFQ 2 | Support body, shoulder, thread and point geometry |
| RFQ 3 | Panel material, thickness and hole specification |
| RFQ 4 | Shelf material, edge and bearing interface |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Small metal shelf support peg with a pointed self-tapping panel thread and cylindrical support body. Confirm panel hole, geometry, finish and packaging.
