Multicolor Pan Head Screw Blister Pack — Small pan head screws in purple, blue, green, gold-toned and reddish metallic colors shown in a clear retail blister pack. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Small pan head screws in purple, blue, green, gold-toned and reddish metallic colors shown in a clear retail blister pack. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Multicolor Pan Head Screw Blister Pack |
|---|---|
| Current Product Configuration | Small pan head screws in purple, blue, green, gold-toned and reddish metallic colors shown in a clear retail blister pack. |
| Primary Form | Colored pan head screw supplied in a counted clear blister-card format. |
| Head / Interface | Confirm pan head diameter and height, drive type and size, under-head geometry, seating and tool access. |
| Thread / Mating Part | Confirm thread diameter, pitch or self-tapping form, length, point or end, mating part or substrate and required engagement. |
| Current Appearance | Multiple bright metallic colors are visible; confirm base material, finish process, approved color samples and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate or mating thread, hole preparation, joint stack, driver, seating and buyer-specified tightening or installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Color-coded assembly hardware | Approve each screw color and item code separately. |
|---|---|
| Decorative consumer hardware packs | Confirm visible finish, screw geometry and package presentation. |
| Sample and promotion packs | Control the real screw specification and count. |
| Private-label blister programs | Approve cavity, card, artwork, barcode and cartons. |
Buyer Guide
| Do the photographed colors define the finish process? | No. Confirm finish process, approved color sample and service condition for every variant. |
|---|---|
| Can screw diameter and length be customized? | Compatible diameters and lengths can be reviewed against the screw subtype, thread, point, substrate and manufacturing route. |
| How is the blister count approved? | Specify every color or screw variant, quantity and cavity. |
| What package files are required? | Provide blister and card dimensions, artwork, barcode, legal marks and carton plan. |
Quality Control
| Head and drive | Inspect geometry, recess, edges and visible finish. |
|---|---|
| Thread and end | Check profile, length, point or end and mating fit. |
| Color and assembly trial | Compare approved color and verify installation in the confirmed application. |
| Blister audit | Confirm variant, count, cavity, seal, artwork, barcode and carton. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Do the photographed colors define the finish process? | No. Confirm finish process, approved color sample and service condition for every variant. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, length and point |
| RFQ 3 | Substrate or mating thread and joint stack |
| RFQ 4 | Material, finish process and color samples |
| RFQ 5 | Variant quantity and cavity plan |
| RFQ 6 | Blister card, artwork, barcode and cartons |
MOQ: 10,000 pcs per confirmed specification
Multicolor pan head screws displayed in a clear blister pack. Confirm head, drive, thread, length, material, finish colors, count and package artwork.
