Brown Plastic Rafix Furniture Connector — Brown plastic connector housings shown with a recessed cross-drive metal cam and a separate silver-colored coarse-thread mating dowel. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Brown plastic connector housings shown with a recessed cross-drive metal cam and a separate silver-colored coarse-thread mating dowel. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Brown Plastic Rafix Furniture Connector |
|---|---|
| Current Product Configuration | Brown plastic connector housings shown with a recessed cross-drive metal cam and a separate silver-colored coarse-thread mating dowel. |
| Primary Form | Rafix-style panel connector intended to seat in a prepared recess and engage a confirmed mating dowel in knock-down furniture. |
| Head / Interface | Confirm housing outline and recess, cam diameter and drive, dowel head and shoulder, panel edge clearance, insertion direction and tightening access. |
| Thread / Mating Part | Confirm dowel thread diameter, pitch or form, threaded length, panel engagement, cam capture and the approved panel-hole system. |
| Current Appearance | Brown polymer housing and silver-colored metal components are shown; confirm resin, color range, metal material, finish and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel materials and thicknesses, housing bore and depth, edge hole, dowel pilot hole, center distances, orientation, driver and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Coordinate housing recess, dowel position and panel thickness. |
|---|---|
| Shelf-to-side panel connections | Confirm edge clearance, orientation and tightening access. |
| Replacement Rafix-style fittings | Compare housing, cam and dowel interfaces with approved samples. |
| OEM furniture connector packs | Control housing, cam and dowel ratio, labels and protection. |
Buyer Guide
| Which panel machining data are required? | Provide panel materials, thicknesses, bore diameters and depths, center distances and tolerances. |
|---|---|
| How is the mating dowel selected? | Confirm head, shoulder, thread form, engagement and cam capture by drawing or sample. |
| Does the brown color define the resin? | No. Confirm resin, color range, service conditions and approved sample. |
| Can other Rafix shapes substitute automatically? | No. Approve the housing, cam, dowel and panel machining as one matched system. |
Quality Control
| Housing and cam | Inspect housing profile, bore fit, cam recess, drive, rotation and visible defects. |
|---|---|
| Mating dowel | Check head, shoulder, thread, length, straightness and finish. |
| Panel joint trial | Verify machining, insertion, alignment, cam capture and buyer-specified joint test. |
| Pack audit | Confirm matched components, color, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which panel machining data are required? | Provide panel materials, thicknesses, bore diameters and depths, center distances and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Connector and dowel drawings or samples |
|---|---|
| RFQ 2 | Panel materials, thicknesses and machining |
| RFQ 3 | Cam capture, orientation and driver access |
| RFQ 4 | Dowel thread, engagement and pilot hole |
| RFQ 5 | Materials, finish, color and acceptance criteria |
| RFQ 6 | Quantity, component ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Brown plastic Rafix-style furniture connector with a cross-drive cam and mating threaded dowel. Confirm panel bores, engagement, finish and packaging.
