Square Furniture Leg Mounting Plate — Square stamped metal mounting plates shown with dished circular centers, multiple perimeter fixing holes and silver, yellow-toned or black appearances. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Square stamped metal mounting plates shown with dished circular centers, multiple perimeter fixing holes and silver, yellow-toned or black appearances. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Square Furniture Leg Mounting Plate |
|---|---|
| Current Product Configuration | Square stamped metal mounting plates shown with dished circular centers, multiple perimeter fixing holes and silver, yellow-toned or black appearances. |
| Primary Form | Furniture leg mounting plate that distributes attachment through a confirmed hole pattern while locating the mating leg or connector at its dished center. |
| Head / Interface | Confirm plate outline, corner form, dish diameter and depth, center interface, hole count, diameters and locations, seating face and mating leg geometry. |
| Thread / Mating Part | Confirm any center thread, stud, nut or mating insert separately; the images do not establish a threaded interface. |
| Current Appearance | Silver, yellow-toned and black appearances are shown; confirm base material, stamping route, finish, color range and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm furniture frame material, mating leg or fitting, hole pattern, fasteners, access, seating surface, installation method and buyer-specified assembly test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Sofa and table leg attachment | Match the plate center and hole pattern to the approved leg and frame. |
|---|---|
| Bed and cabinet feet | Confirm mounting surface, access and installed orientation. |
| Replacement mounting hardware | Compare plate, dish, holes and mating component with approved samples. |
| OEM furniture hardware cartons | Control finish variant, count, labels and edge protection. |
Buyer Guide
| Which plate dimensions are required? | Provide outline, thickness, dish geometry, hole pattern and tolerances. |
|---|---|
| What defines the center interface? | Identify the mating leg, stud, insert or fastener and its installed section. |
| Can the photographed finish define the material? | No. Confirm base material, finish and approved sample. |
| How is assembly approved? | Use the production frame and mating leg for fit, seating and buyer-specified testing. |
Quality Control
| Stamped plate geometry | Inspect outline, thickness, dish, flatness, corners and edges. |
|---|---|
| Hole pattern | Check count, diameters, positions, burrs and center interface. |
| Representative assembly trial | Verify seating, alignment, fastener access and buyer-specified test. |
| Finish and pack audit | Confirm finish variant, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which plate dimensions are required? | Provide outline, thickness, dish geometry, hole pattern and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Plate drawing or approved sample |
|---|---|
| RFQ 2 | Outline, thickness, dish and hole pattern |
| RFQ 3 | Mating leg, center interface and fasteners |
| RFQ 4 | Furniture frame and installation method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Square stamped furniture leg mounting plate with a dished center and fixing holes. Confirm plate geometry, hole pattern, thickness, finish and packaging.
