Cam Lock with Black-Sleeved Connector Bolt — Metal eccentric cam shown with a connector bolt carrying a black polymer sleeve and a coarse threaded panel end. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam shown with a connector bolt carrying a black polymer sleeve and a coarse threaded panel end. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cam Lock with Black-Sleeved Connector Bolt |
|---|---|
| Current Product Configuration | Metal eccentric cam shown with a connector bolt carrying a black polymer sleeve and a coarse threaded panel end. |
| Primary Form | Furniture panel connector using a cam to capture the shaped head of a sleeved, coarse-thread connector bolt. |
| Head / Interface | Confirm cam recess and capture path, bolt head and neck, sleeve profile and retention, shank, shoulder and projection. |
| Thread / Mating Part | Coarse panel thread shown; confirm diameter, profile, threaded length, pilot hole, panel material and engagement. |
| Current Appearance | Bright metallic cam and bolt with a black polymer sleeve shown; confirm metal materials, finish, sleeve resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, pilot hole, centerline, sleeve position, bolt projection and cam direction. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-sleeved-bolt packs can be reviewed with sleeve protection, controlled pair counts, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet and wardrobe panel joints | Coordinate cam bore, pilot hole, sleeve position and bolt projection. |
|---|---|
| Knock-down furniture assembly | Confirm drilling and component sequence on representative panels. |
| Sleeved connector replacements | Compare cam, bolt, sleeve and drilled panel as one system. |
| OEM cam-lock hardware packs | Control matched pairs, item codes, protection and instructions. |
Buyer Guide
| What must be confirmed about the black sleeve? | Define its outside profile, position, retention, material, color and function in the panel joint. |
|---|---|
| How is cam engagement checked? | Verify bolt-head geometry, neck, projection, capture path and closing travel. |
| How is the pilot hole selected? | Use the confirmed thread profile, panel material, edge distance and installation trial. |
| Can a similar cam diameter guarantee fit? | No. Cam height, cavity, bolt head, sleeve and hole centerline must also match. |
Quality Control
| Cam and bolt geometry | Inspect cam cavity, bolt head, neck, shank, shoulder, thread and finish. |
|---|---|
| Polymer sleeve | Check dimensions, position, retention, molding condition and surface damage. |
| Panel installation | Verify pilot hole, projection, capture, closing, pull-up and release. |
| Pair and pack audit | Confirm matched count, item identity, label, instructions and protection. |
Packaging & Customization
| Packaging Format | Matched cam-and-sleeved-bolt packs can be reviewed with sleeve protection, controlled pair counts, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What must be confirmed about the black sleeve? | Define its outside profile, position, retention, material, color and function in the panel joint. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-sleeved-bolt packs can be reviewed with sleeve protection, controlled pair counts, labels and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and sleeved-bolt drawings or approved samples |
|---|---|
| RFQ 2 | Cam capture and bolt-head geometry |
| RFQ 3 | Sleeve profile, position and retention |
| RFQ 4 | Thread, pilot hole, panel and installed projection |
| RFQ 5 | Metal finish, sleeve resin and joint test |
| RFQ 6 | Pair quantity, instructions, label and packaging |
MOQ: 10,000 pcs per confirmed specification
Furniture cam lock with a black-sleeved connector bolt for panel assembly. Confirm sleeve, cam interface, threads, holes, projection, finish and packaging.
