Cross-Drive Countersunk Self-Drilling Screw — Bright silver-colored screws shown with flat countersunk heads, cross recesses, full threads and drill-point ends, including sheet-metal examples. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored screws shown with flat countersunk heads, cross recesses, full threads and drill-point ends, including sheet-metal examples. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Countersunk Self-Drilling Screw |
|---|---|
| Current Product Configuration | Bright silver-colored screws shown with flat countersunk heads, cross recesses, full threads and drill-point ends, including sheet-metal examples. |
| Primary Form | Self-drilling screw combining a drill point, external thread and countersunk head for a prepared or formed seating condition. |
| Head / Interface | Confirm head diameter and angle, cross-drive form and depth, under-head transition, seating requirement and driver access. |
| Thread / Mating Part | Confirm thread diameter, pitch or form, threaded length, drill-point geometry, workpiece stack, drilling capacity requirement and engagement. |
| Current Appearance | Bright silver-colored appearance shown; confirm material, finish system, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm sheet materials and thicknesses, joint stack, drilling direction, speed, driver, seating depth and buyer-specified installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Sheet-metal lap joints | Match the drill point and thread to the confirmed sheet stack. |
|---|---|
| Metal framing and profiles | Confirm access, seating and edge distances. |
| Panels requiring a flat head | Coordinate the countersunk seat with the actual workpieces. |
| OEM self-drilling screw packs | Control point, thread, length, count, labels and protection. |
Buyer Guide
| How is the drill point selected? | Use the workpiece materials, total thickness, drilling direction and buyer trial. |
|---|---|
| Which countersunk data are required? | Specify head diameter, angle, recess and final seating condition. |
| Can drilling capacity be inferred from the photo? | No. State the workpiece stack and required installation test. |
| Which finish should be ordered? | Confirm the finish process, corrosion requirement and approved sample. |
Quality Control
| Head and recess | Inspect angle, diameter, recess, seating face and edges. |
|---|---|
| Thread and drill point | Check profile, length, point geometry, symmetry and damage. |
| Installation trial | Verify drilling, thread formation, seating and buyer-specified test in representative sheets. |
| Variant and pack audit | Confirm thread, point, length, count, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| How is the drill point selected? | Use the workpiece materials, total thickness, drilling direction and buyer trial. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread and drill-point geometry |
| RFQ 3 | Sheet materials, thicknesses and joint stack |
| RFQ 4 | Driver, speed, seating and test method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
