Slotted Countersunk Machine Screw — Bright silver-colored screws shown with flat countersunk heads, single straight slots, full machine threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored screws shown with flat countersunk heads, single straight slots, full machine threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Slotted Countersunk Machine Screw |
|---|---|
| Current Product Configuration | Bright silver-colored screws shown with flat countersunk heads, single straight slots, full machine threads and blunt ends. |
| Primary Form | Fully threaded machine screw with a slotted countersunk head intended to seat flush in a matching recess. |
| Head / Interface | Confirm head diameter and angle, head height, slot width and depth, seating face, edge condition and screwdriver access. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch, class, threaded length, blunt end, mating nut or tapped hole and engagement. |
| Current Appearance | Bright silver-colored appearance shown; confirm base material, finish process, corrosion requirement and visible-surface criteria. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm countersink geometry, mating thread, joint stack, clearance hole, screwdriver access, tightening method and buyer criteria. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Flush metal fixture joints | Match the head angle and slot to the prepared seat and driver. |
|---|---|
| Hinges and hardware plates | Confirm hole, recess, mating thread and visible-head requirement. |
| Equipment restoration hardware | Use an approved sample for slot, head and finish comparison. |
| OEM counted screw packs | Control thread, length, count, label and surface protection. |
Buyer Guide
| Which slot dimensions are required? | Specify slot width, depth, length, edge condition and screwdriver fit. |
|---|---|
| How is the countersunk seat approved? | Provide head angle, diameter and the actual prepared recess. |
| Can the photographed screw length define production? | No. Confirm length, thread and tolerances by drawing or sample. |
| Which mating data are required? | Provide the nut or tapped hole, thread, engagement, joint stack and tightening method. |
Quality Control
| Countersunk head and slot | Inspect angle, diameter, height, slot geometry, edges and seating face. |
|---|---|
| Machine thread and end | Check profile, pitch, class, length, end condition and mating fit. |
| Assembly trial | Verify flush seating, screwdriver access, engagement and specified tightening test. |
| Variant and pack audit | Confirm thread and length identity, count, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Which slot dimensions are required? | Specify slot width, depth, length, edge condition and screwdriver fit. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Countersunk head and slot geometry |
| RFQ 3 | Thread, length and mating part |
| RFQ 4 | Countersink, joint stack and installation method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
