Tapered Hex-Drive Wood Insert Nut — Yellow-toned tapered insert nuts shown with a low flange, internal hex drive, internal machine thread and coarse interrupted external ribs. Final nut geometry, internal thread, seating, mating part, material, finish and packaging require confirmation.
Product Overview
| Photographed Configuration | Yellow-toned tapered insert nuts shown with a low flange, internal hex drive, internal machine thread and coarse interrupted external ribs. |
|---|---|
| Purchasing Position | Custom nut requiring geometry, internal thread, seating, mating-part and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Tapered Hex-Drive Wood Insert Nut |
|---|---|
| Current Product Configuration | Yellow-toned tapered insert nuts shown with a low flange, internal hex drive, internal machine thread and coarse interrupted external ribs. |
| Primary Form | Wood insert nut intended to be driven into a prepared panel hole and provide a reusable internal thread for a confirmed mating bolt. |
| Head / Interface | Confirm flange diameter and thickness, hex-drive size and depth, entry face, tapered body, external rib geometry, insertion depth and tool access. |
| Thread / Mating Part | Confirm internal thread diameter, pitch and class, usable engagement, mating bolt and compatibility with the approved insert body and panel hole. |
| Current Appearance | Yellow-toned metallic finish is shown; confirm base material, finish system, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and density, thickness, pilot-hole diameter and depth, edge distance, insertion direction, driver and buyer-specified pull or torque evaluation. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with nut geometry, internal thread, seating interface, mating-bolt or axle and installation specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative nuts, mating parts, workpieces and approved finish samples. |
| Custom Geometry | Flange, body, prongs or tool interface and internal thread can be reviewed against the approved assembly. |
| Material & Finish Review | Material and finish options require confirmation against thread, seating, installation and service requirements. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed panel, pilot hole, driver and mating bolt. |
Applications
| Knock-down cabinet joints | Match the insert, pilot hole and mating bolt to the approved panel joint. |
|---|---|
| Furniture leg and frame assembly | Confirm panel density, insertion depth and bolt engagement. |
| Reusable threaded panel connections | Coordinate internal thread, bolt, seating and installation access. |
| OEM insert-and-bolt packs | Control thread pairing, component ratio, count, labels and protection. |
Buyer Guide
| Which panel-hole data are required? | Provide panel material and density, thickness, pilot-hole diameter and depth, edge distance and tolerances. |
|---|---|
| How is the mating bolt selected? | Confirm bolt thread, class, engagement, joint stack and tightening method. |
| Can the photographed nut define production dimensions? | No. Approve the flange, body, ribs, thread and tolerances by drawing or sample. |
| How is insertion approved? | Use production-representative panels for driving, seating, thread fit and buyer-specified evaluation. |
Quality Control
| Flange, body and hex drive | Inspect diameters, length, taper, recess, seating face, ribs and burrs. |
|---|---|
| Internal thread | Check diameter, pitch, class, depth and engagement with the confirmed mating bolt. |
| Panel installation trial | Verify hole preparation, insertion, seating, retention and buyer-specified test. |
| Finish and pack audit | Confirm surface, thread variant, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed nut? | No. The gallery records the current photographed configuration. Final flange, body, prongs or tool interface, internal thread, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the thread and nut geometry be customized? | Internal thread, flange, body and applicable prong or tool geometry can be reviewed against the confirmed mating part, workpiece and installation method. |
| Which panel-hole data are required? | Provide panel material and density, thickness, pilot-hole diameter and depth, edge distance and tolerances. |
| How is the mating bolt selected? | Confirm bolt thread, class, engagement, joint stack and tightening method. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the insert drawing or sample, panel and pilot-hole specification, mating bolt, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Insert drawing or approved sample |
|---|---|
| RFQ 2 | Flange, body, ribs, hex drive and internal thread |
| RFQ 3 | Panel material, thickness and pilot hole |
| RFQ 4 | Mating bolt and joint section |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Component ratio, quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
