Hex-Drive Threaded Wood Insert Nut — Short metal insert nuts shown with an internal hex drive, flanged entry face, coarse external ribs and an internal threaded bore. Final nut geometry, internal thread, seating, mating part, material, finish and packaging require confirmation.
Product Overview
| Photographed Configuration | Short metal insert nuts shown with an internal hex drive, flanged entry face, coarse external ribs and an internal threaded bore. |
|---|---|
| Purchasing Position | Custom nut requiring geometry, internal thread, seating, mating-part and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Hex-Drive Threaded Wood Insert Nut |
|---|---|
| Current Product Configuration | Short metal insert nuts shown with an internal hex drive, flanged entry face, coarse external ribs and an internal threaded bore. |
| Primary Form | Threaded insert intended to create a reusable machine-thread interface in a compatible prepared wood or engineered-panel hole. |
| Head / Interface | Confirm flange diameter and thickness, body length and taper, hex-drive size and depth, external rib geometry, entry profile and seating depth. |
| Thread / Mating Part | Confirm internal thread diameter, pitch and class, thread depth, mating bolt, required engagement and end condition. |
| Current Appearance | Yellow-toned and silver-colored examples are shown; confirm base material, finish process, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and thickness, pilot-hole diameter and depth, edge distance, driver, installation method, mating bolt and buyer-specified pull-out or torque test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with nut geometry, internal thread, seating interface, mating-bolt or axle and installation specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative nuts, mating parts, workpieces and approved finish samples. |
| Custom Geometry | Flange, body, prongs or tool interface and internal thread can be reviewed against the approved assembly. |
| Material & Finish Review | Material and finish options require confirmation against thread, seating, installation and service requirements. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed panel, pilot hole, driver and mating bolt. |
Applications
| Cabinet panel inserts | Match the body and pilot hole to the confirmed panel. |
|---|---|
| Furniture knock-down joints | Coordinate the insert thread with the mating bolt and joint stack. |
| Replacement threaded inserts | Compare body, drive and internal thread with an approved sample. |
| OEM insert-nut packs | Control thread variants, finish groups, counts and labels. |
Buyer Guide
| Which panel data are required? | Provide material, density or grade where relevant, thickness, pilot hole, edge distance and installation direction. |
|---|---|
| How is the external profile approved? | Confirm ribs, taper, flange, body length and seating depth against the panel and installation method. |
| Which mating-bolt data are required? | Provide thread, class, engagement, joint stack and tightening method. |
| Can pull-out strength be inferred from the image? | No. State the complete panel, hole, installation and buyer-specified test method. |
Quality Control
| Insert body and drive | Inspect flange, ribs, taper, hex drive, bore, edges and visible defects. |
|---|---|
| Internal thread | Check diameter, pitch, class, depth, damage and mating-bolt fit. |
| Panel installation trial | Verify pilot-hole fit, seating, driver engagement and buyer-specified tests. |
| Finish and pack audit | Confirm surface, thread identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed nut? | No. The gallery records the current photographed configuration. Final flange, body, prongs or tool interface, internal thread, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the thread and nut geometry be customized? | Internal thread, flange, body and applicable prong or tool geometry can be reviewed against the confirmed mating part, workpiece and installation method. |
| Which panel data are required? | Provide material, density or grade where relevant, thickness, pilot hole, edge distance and installation direction. |
| How is the external profile approved? | Confirm ribs, taper, flange, body length and seating depth against the panel and installation method. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the insert drawing or sample, panel and pilot-hole specification, mating bolt, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Insert drawing or approved sample |
|---|---|
| RFQ 2 | Internal thread and mating-bolt specification |
| RFQ 3 | Panel material, thickness and pilot hole |
| RFQ 4 | Installation driver and seating method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
