Cross-Drive Low Pan-Head Self-Tapping Screw — Black and silver-colored pointed screws shown with low pan heads, cross recesses and coarse full-length self-tapping threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black and silver-colored pointed screws shown with low pan heads, cross recesses and coarse full-length self-tapping threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Low Pan-Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Black and silver-colored pointed screws shown with low pan heads, cross recesses and coarse full-length self-tapping threads. |
| Primary Form | Self-tapping screw intended to form or engage a compatible thread in a confirmed sheet, bracket, panel or prepared substrate. |
| Head / Interface | Confirm low pan-head diameter and height, cross-drive type and depth, bearing face, under-head transition and driver clearance. |
| Thread / Mating Part | Confirm thread diameter and form, pitch, threaded length, point geometry, pilot-hole requirement and substrate engagement. |
| Current Appearance | Black and silver-colored variants are shown; confirm base material, finish system, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate material and thickness, pilot or formed hole, fixture thickness, seating surface, edge distance, driver and installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Cabinet hardware fastening | Coordinate screw geometry, fitting hole and panel substrate. |
|---|---|
| Sheet-metal bracket assembly | Confirm pilot-hole strategy, engagement and bearing surface. |
| Equipment trim installation | Check head clearance, substrate thickness and driver access. |
| OEM self-tapping screw packs | Control finish variants, counts, labels and protection. |
Buyer Guide
| Which substrate data are required? | Provide material, thickness, hardness or grade where relevant, hole preparation and joint section. |
|---|---|
| How is the point selected? | Confirm entry condition, pilot hole, engagement and installation method against the actual substrate. |
| Can black and silver finishes be mixed in one order? | Define each finish, quantity, item code and packaging group in the approved specification. |
| Can the photographed size define production? | No. Confirm every dimension and tolerance by drawing, sample or purchase specification. |
Quality Control
| Head and cross drive | Inspect diameter, height, recess, bearing face and burrs. |
|---|---|
| Self-tapping thread and point | Check diameter, form, pitch, straightness, point and thread damage. |
| Substrate installation trial | Verify entry, thread formation, seating and buyer-specified test. |
| Finish and pack audit | Confirm variant, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which substrate data are required? | Provide material, thickness, hardness or grade where relevant, hole preparation and joint section. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread and point specification |
| RFQ 3 | Substrate material, thickness and prepared hole |
| RFQ 4 | Fixture stack, engagement and installation method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
