Yellow-Toned Cross-Drive Self-Tapping Screw — Yellow-toned screws shown with rounded pan heads, cross drives, pointed ends and coarse full-length self-tapping threads; a silver color variant is also photographed. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Yellow-toned screws shown with rounded pan heads, cross drives, pointed ends and coarse full-length self-tapping threads; a silver color variant is also photographed. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Yellow-Toned Cross-Drive Self-Tapping Screw |
|---|---|
| Current Product Configuration | Yellow-toned screws shown with rounded pan heads, cross drives, pointed ends and coarse full-length self-tapping threads; a silver color variant is also photographed. |
| Primary Form | Pan-head self-tapping screw intended to form or engage a thread in a confirmed thin material or prepared substrate. |
| Head / Interface | Confirm pan-head diameter and height, top radius, cross-drive type and depth, bearing face, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm diameter, self-tapping thread form and pitch, threaded length, point geometry, pilot hole, substrate and required engagement. |
| Current Appearance | Yellow-toned and silver-colored variants are photographed; select one approved material and finish system, color range and corrosion requirement. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate material and thickness, fixture hole, joint stack, pilot hole if required, edge distance, driver, seating and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Furniture hardware fastening | Match point, thread and hole to the approved substrate and fixture. |
|---|---|
| Thin metal bracket assembly | Confirm substrate thickness, pilot hole and engagement. |
| Cabinet accessory installation | Coordinate head bearing, driver access and visible finish. |
| OEM color-variant packs | Treat yellow-toned and silver finishes as separately approved variants. |
Buyer Guide
| Which substrate information is required? | Provide material, thickness, hardness if relevant, fixture hole, pilot hole, engagement and edge distance. |
|---|---|
| How is the self-tapping thread approved? | Use the confirmed substrate and hole condition for driving, thread formation, seating and buyer-specified testing. |
| Are yellow-toned and silver screws interchangeable? | No. Select and approve the material and finish for each ordered variant. |
| Can the pictured size define production? | No. Confirm all dimensions and tolerances by drawing, sample or purchase specification. |
Quality Control
| Pan head and drive | Inspect diameter, height, recess, bearing face and burrs. |
|---|---|
| Thread and point | Check form, pitch, length, point, straightness and damage. |
| Substrate trial | Verify pilot hole if used, driving, thread formation, seating and buyer-specified test. |
| Finish and pack audit | Confirm selected color, surface, variant identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which substrate information is required? | Provide material, thickness, hardness if relevant, fixture hole, pilot hole, engagement and edge distance. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, point and dimensions |
| RFQ 3 | Fixture hole and joint stack |
| RFQ 4 | Substrate, pilot hole and installation method |
| RFQ 5 | Selected material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
