Furniture Cam Connector Dowel — Silver-colored straight connector dowels shown with rounded capture heads, smooth shank sections and coarse external panel-engagement threads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored straight connector dowels shown with rounded capture heads, smooth shank sections and coarse external panel-engagement threads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Furniture Cam Connector Dowel |
|---|---|
| Current Product Configuration | Silver-colored straight connector dowels shown with rounded capture heads, smooth shank sections and coarse external panel-engagement threads. |
| Primary Form | Cam-connector dowel intended to install into one panel and engage a confirmed eccentric cam in the mating panel. |
| Head / Interface | Confirm capture-head diameter and height, neck, shank, shoulders, installed projection, cam-entry clearance and engagement depth. |
| Thread / Mating Part | Confirm panel-engagement thread, pitch or form, threaded length, point or end profile, pilot hole, panel material and mating-cam geometry. |
| Current Appearance | Bright silver-colored metal is shown; confirm base material, finish, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials, hole diameters and depths, offsets, insertion method, mating cam, assembly sequence and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cam-lock cabinet joints | Coordinate dowel projection and capture head with the selected cam. |
|---|---|
| Knock-down shelving | Confirm panel holes, offsets and assembly access. |
| Replacement connector programs | Compare dowel, panel holes and mating cam with approved samples. |
| OEM furniture hardware bags | Control dowel-to-cam ratio, count, labels and instructions. |
Buyer Guide
| Is the mating cam included? | Identify the cam separately and define the component ratio in the approved BOM. |
|---|---|
| Which panel-hole data are required? | Provide diameters, depths, offsets, tolerances and panel materials for both sides. |
| Can the photographed dimension define production? | No. Confirm geometry and tolerances by drawing or approved sample. |
| How is connector fit approved? | Use production panels and the confirmed cam for insertion, capture and tightening trials. |
Quality Control
| Capture head and shank | Inspect head, neck, shoulders, straightness and visible surface. |
|---|---|
| Panel thread | Check form, pitch, length, end profile and damage. |
| Panel-and-cam trial | Verify insertion, projection, entry, capture, tightening and buyer test. |
| Set and pack audit | Confirm component ratio, count, labels, instructions and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Is the mating cam included? | Identify the cam separately and define the component ratio in the approved BOM. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Dowel drawing or approved sample |
|---|---|
| RFQ 2 | Mating cam and complete connector BOM |
| RFQ 3 | Panel materials, holes, offsets and joint section |
| RFQ 4 | Insertion and tightening method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Set quantity, labels, instructions and packaging |
MOQ: 10,000 pcs per confirmed specification
