Concealed Cam Shelf Support Fitting — Compact U-shaped or rounded shelf-support bodies shown in metallic and colored variants with recessed cross-drive cams and separate coarse-thread mating screws. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Compact U-shaped or rounded shelf-support bodies shown in metallic and colored variants with recessed cross-drive cams and separate coarse-thread mating screws. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Concealed Cam Shelf Support Fitting |
|---|---|
| Current Product Configuration | Compact U-shaped or rounded shelf-support bodies shown in metallic and colored variants with recessed cross-drive cams and separate coarse-thread mating screws. |
| Primary Form | Concealed shelf or panel fitting intended to seat in a prepared pocket and lock to a confirmed mating screw through an internal cam. |
| Head / Interface | Confirm body outline and depth, open side, cam diameter and drive, shelf bearing feature, screw head capture, panel clearance and tightening access. |
| Thread / Mating Part | Confirm mating-screw thread diameter, form and length, pilot hole, panel engagement, head geometry, projection and cam capture. |
| Current Appearance | Metallic, white, brown, black and red photographed variants are shown; confirm body material, color, cam material, finish and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel and shelf materials and thicknesses, body pocket, edge opening, screw pilot hole, center distances, orientation, driver and buyer-specified joint or load test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed cabinet shelf joints | Coordinate body pocket, screw projection and shelf interface. |
|---|---|
| Knock-down panel furniture | Confirm machining, orientation and tightening access. |
| Color-matched furniture fittings | Approve body color and visible surface against the panel. |
| OEM shelf connector packs | Control body, cam and screw ratio, labels and protection. |
Buyer Guide
| Which machining data are required? | Provide body pocket, edge opening, pilot hole, panel thickness and all center distances. |
|---|---|
| How is the screw matched to the cam? | Confirm head capture, projection, thread engagement and tightening behavior by drawing or sample. |
| Are photographed colors one production option? | No. Approve each body material and color as a separate variant. |
| Can a shelf load be inferred? | No. State the installed cabinet geometry and buyer-specified test method. |
Quality Control
| Body and cam | Inspect outline, depth, opening, shelf feature, cam recess, drive and rotation. |
|---|---|
| Mating screw | Check head capture, thread, length, straightness and surface. |
| Panel and shelf trial | Verify machining, seating, screw projection, cam lock and buyer-specified test. |
| Color and pack audit | Confirm selected variant, complete set, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which machining data are required? | Provide body pocket, edge opening, pilot hole, panel thickness and all center distances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Fitting and screw drawings or samples |
|---|---|
| RFQ 2 | Panel and shelf materials and thicknesses |
| RFQ 3 | Body pocket, edge opening and center distances |
| RFQ 4 | Screw pilot hole, projection and cam capture |
| RFQ 5 | Materials, colors, finish and test requirement |
| RFQ 6 | Quantity, component ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
