Product Overview
| cross-drive low pan head pointed screw | A black-appearance pointed screw with a cross recess, broad low pan head and coarse full-length thread for a confirmed pilot-hole assembly. |
|---|---|
| Buying context 1 | The broad low head provides a larger bearing face than a countersunk head, so bracket-hole size, surface contact and head clearance must be checked together. |
| Buying context 2 | The sharp point and coarse thread require a representative installation trial in the specified wood, engineered board, thin panel or other receiving material. |
| Procurement note | Diameter, pitch, length and measurement datum; Broad-head and cross-drive dimensions; Substrate, bracket and pilot-hole condition; Required engagement and point clearance; Material, finish and acceptance criteria; Quantity, matched hardware and packaging. |
Specifications & Custom Capability
Use the photographed configuration to identify the product form. Dimensions, materials, finishes and order-dependent requirements are confirmed against the approved drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Pointed coarse-thread screw |
|---|---|
| Head | Broad low pan or truss-style head |
| Drive | Cross recess |
| Thread | Coarse full-length thread shown |
| Point | Sharp pointed lead shown |
| Current Appearance | Black appearance; confirm material and surface treatment |
| Material | Confirm according to drawing, sample or purchase specification. |
| Substrate | Specify wood, engineered board, thin panel or other receiving material |
| Pilot Hole | Confirm requirement, diameter and depth through representative trials |
| Head Bearing | Confirm hole clearance, contact area and surface condition |
| Thread Engagement | Confirm required embedment, edge distance and point clearance |
| Installation | Confirm driver size, speed or torque method and access |
Custom Manufacturing & Order Review
| Customization Scope | Diameter, pitch, length, point, broad low head, cross recess, material, finish and packaging can be reviewed against the approved bracket, substrate and joint drawing. |
|---|---|
| Manufacturing Capability | Review diameter, pitch, length, point, head and drive against the approved joint and substrate |
| Made-to-Drawing | Available for review with the screw drawing and installed-joint section |
| Made-to-Sample | Available for comparison with a representative screw, substrate and bracket |
| Custom Specification Review | Review substrate, pilot hole, engagement, head bearing, material and finish before quotation |
| Packaging & Private Label | Bulk cartons, counted packs, hardware kits and labels can be reviewed according to confirmed requirements |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request the selected screw for representative insertion, seating and removal trials |
| Custom Thread Range | Self-tapping configurations from M1 to M12 can be reviewed where compatible with the head, substrate and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed according to thread diameter, head geometry and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed according to the confirmed material, service environment, appearance and acceptance requirements. |
Applications
| Cable clips on thin panels | Confirm clip thickness, pilot hole, head bearing and clearance. |
|---|---|
| Furniture brackets | Match bracket opening, substrate, edge distance and required engagement. |
| Cabinet hardware plates | Check the broad head against the plate hole and the finished surface. |
| Matched black hardware kits | Keep the screw, bracket and finish sample under one approved bill of materials. |
Buyer Guide
| Why use a broad low head? | It provides a wide bearing face, but hole clearance and surface behavior must be verified in the actual assembly. |
|---|---|
| Is a pilot hole required? | That depends on substrate, thickness, edge distance and thread geometry. Confirm it through representative trials. |
| How should length be selected? | Define bracket thickness, required engagement, point clearance and rear-side conditions. |
| Can the black finish be customized? | Yes. Confirm the coating system, color sample, service environment and acceptance criteria. |
Quality Control
| Thread and point | Check diameter, pitch, usable length, runout and point condition. |
|---|---|
| Head and cross drive | Inspect head diameter, height, bearing face, recess geometry and driver fit. |
| Installation trial | Review insertion, seating, substrate behavior, point clearance and removal. |
| Material and finish | Verify approved material and surface treatment and protect heads and points during packing. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified method, mating parts and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use protected bulk cartons, counted bags or matched hardware kits. Separate diameter, length and finish variants and protect the broad heads and sharp points. |
|---|---|
| OEM review | Diameter, pitch, length, point, broad low head, cross recess, material, finish and packaging can be reviewed against the approved bracket, substrate and joint drawing. |
Frequently Asked Questions
| Is the head countersunk? | The photographs show a broad low pan or truss-style bearing head rather than a conventional countersunk profile. |
|---|---|
| Can diameter and length be customized? | Self-tapping configurations from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed application. |
| Does it always need a pilot hole? | No universal rule is stated. Confirm the pilot-hole requirement through representative trials in the specified substrate. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed according to the confirmed material, service environment, appearance and acceptance requirements. |
| Is the black appearance proof of the coating? | No. Specify the coating system, service environment, appearance and acceptance criteria in the purchase specification. |
| What is required for quotation? | Send the screw and joint drawings, substrate, pilot hole, bracket, finish, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Diameter, pitch, length and measurement datum |
| RFQ item 2 | Broad-head and cross-drive dimensions |
| RFQ item 3 | Substrate, bracket and pilot-hole condition |
| RFQ item 4 | Required engagement and point clearance |
| RFQ item 5 | Material, finish and acceptance criteria |
| RFQ item 6 | Quantity, matched hardware and packaging |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
A black-appearance pointed screw with a cross recess, broad low pan head and coarse full-length thread for a confirmed pilot-hole assembly.
