Dished Metal Table Leg Mounting Plate — Silver-colored dished metal mounting plates shown with polygonal outlines, perimeter fixing holes and a raised central threaded interface. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored dished metal mounting plates shown with polygonal outlines, perimeter fixing holes and a raised central threaded interface. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Dished Metal Table Leg Mounting Plate |
|---|---|
| Current Product Configuration | Silver-colored dished metal mounting plates shown with polygonal outlines, perimeter fixing holes and a raised central threaded interface. |
| Primary Form | Stamped furniture leg mounting plate that spreads attachment through perimeter holes and receives a central mating leg or threaded part. |
| Head / Interface | Confirm outside outline, plate thickness, dish depth, central boss, perimeter-hole number and positions, edges and mounting-face flatness. |
| Thread / Mating Part | Confirm the central internal thread or insert, mating leg thread, engagement, shoulder seating and tightening method. |
| Current Appearance | Bright silver-colored plates are shown; confirm material, stamping process, finish, corrosion requirement and visible-surface criteria. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm furniture panel material and thickness, pilot holes, mounting screws, plate orientation, mating leg, access and buyer stability test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Table and desk leg attachment | Coordinate plate, central thread, leg shoulder and panel structure. |
|---|---|
| Replaceable furniture leg systems | Confirm hole pattern, outline and mating-thread compatibility. |
| Cabinet and bench bases | Review panel reinforcement, screw locations and edge distances. |
| OEM mounting hardware sets | Control plate, screws, mating part, count and labels. |
Buyer Guide
| Which plate dimensions are required? | Specify outline, thickness, dish depth, boss and every mounting-hole position. |
|---|---|
| How is the central thread selected? | Provide the mating leg or stud, thread, engagement and seating condition. |
| Are mounting screws included? | Define screw type, quantity, pilot holes and packaging separately. |
| Can load capacity be inferred from the photo? | No. Define the panel, leg, spacing, assembly and buyer test method. |
Quality Control
| Stamped plate | Inspect outline, dish, thickness, holes, burrs, flatness and surface. |
|---|---|
| Central interface | Check boss, thread or insert, engagement and mating-leg fit. |
| Furniture assembly trial | Verify hole pattern, screw seating, leg installation and specified test. |
| Set and pack audit | Confirm plate variant, screws, count, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which plate dimensions are required? | Specify outline, thickness, dish depth, boss and every mounting-hole position. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Plate drawing or approved sample |
|---|---|
| RFQ 2 | Outline, dish, thickness and hole pattern |
| RFQ 3 | Central thread and mating leg or stud |
| RFQ 4 | Panel, pilot holes and mounting screws |
| RFQ 5 | Material, finish and buyer test |
| RFQ 6 | Set quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
