Concealed Floating Shelf Support Bracket — Metal hidden shelf supports shown with a wall fixing plate, projecting support rod and black or silver-toned appearances. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal hidden shelf supports shown with a wall fixing plate, projecting support rod and black or silver-toned appearances. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Concealed Floating Shelf Support Bracket |
|---|---|
| Current Product Configuration | Metal hidden shelf supports shown with a wall fixing plate, projecting support rod and black or silver-toned appearances. |
| Primary Form | Concealed shelf bracket transferring load from a drilled shelf to a wall-mounted plate and projecting rod. |
| Head / Interface | Confirm plate outline and thickness, fixing holes, rod diameter and length, weld or joint, shelf bore and installed projection. |
| Thread / Mating Part | Confirm separate wall fasteners or anchors according to the wall substrate and fixing-hole geometry. |
| Current Appearance | Black and silver-toned variants are shown; confirm base material, finish and visible-surface requirement. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm wall substrate, anchors or fasteners, shelf material and thickness, bore, support spacing, leveling and buyer test method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed timber shelves | Match rod and bore to the approved shelf section. |
|---|---|
| Cabinet and display shelving | Confirm support spacing, wall or panel fixing and alignment. |
| Replacement hidden brackets | Compare plate, rod, holes and shelf drilling together. |
| OEM shelf hardware packs | Control brackets, fixing parts, instructions, labels and protection. |
Buyer Guide
| What shelf details are required? | Provide material, thickness, depth, bore diameter, bore depth and edge distances. |
|---|---|
| How are wall fixings selected? | Use the confirmed substrate, plate holes and buyer-specified installation method. |
| Can capacity be taken from a picture? | No. Define shelf geometry, support spacing, substrate and required test method. |
| How is alignment checked? | Approve drilling, rod position, level, projection and installed shelf fit. |
Quality Control
| Plate and rod geometry | Inspect outline, holes, rod diameter, length, straightness and joint. |
|---|---|
| Finish condition | Check approved color, coverage and visible surfaces. |
| Shelf installation trial | Verify drilling, fit, alignment, wall fixing and specified test. |
| Pack audit | Confirm bracket count, fixing-part ratio, instructions, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What shelf details are required? | Provide material, thickness, depth, bore diameter, bore depth and edge distances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Bracket, wall and shelf drawings or samples |
|---|---|
| RFQ 2 | Plate holes, rod geometry and shelf bore |
| RFQ 3 | Wall substrate, fixing parts and installation method |
| RFQ 4 | Shelf material, dimensions and support spacing |
| RFQ 5 | Material, finish and buyer test method |
| RFQ 6 | Set quantity, instructions, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
