B2B product specification
M4 Gold Zinc-Plated Cross-Drive Self-Tapping Screw
This M4 gold zinc plated screw has a low pan head, cross drive and long pointed fully threaded shank. Confirm length, pitch and coating by specification.
- M4 diameter stated in product information
- Gold zinc-plated appearance
- Low pan head with cross drive
- Long pointed fully threaded shank shown
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
This M4 gold zinc plated screw is shown with a low pan head, cross drive and long pointed fully threaded shank. The gold-colored finish can suit visible furniture brackets or coordinated hardware, but coating chemistry, color range and service environment must be confirmed from an approved sample or purchase specification.
For a B2B M4 gold zinc plated screw quotation, provide the required length, thread pitch, furniture material, joint thickness, pilot-hole condition, head clearance, drawing or sample, quantity and packaging. Check point clearance and engagement in the complete assembly before bulk approval.
Procurement note: Specify M4 pitch, required length, furniture material, joint thickness, pilot hole, finish sample, head clearance, quantity and packaging.
Technical Specifications
| Product Type | Long pointed cross-drive self-tapping screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Gold zinc-plated appearance shown; confirm coating, color sample and service environment |
| Diameter | M4 stated in product information |
| Length | Confirm according to drawing, sample or purchase specification |
| Head Type | Low pan head shown in product images |
| Drive Type | Cross drive |
| Thread Type | Fully threaded shank shown; pitch can be customized according to customer requirement |
| Point Type | Pointed end shown; confirm point geometry and pilot-hole condition |
| Standard | Confirm the applicable dimensional standard and edition in the purchase specification |
| Application | Visible furniture brackets, shelf supports, cabinet fittings and coordinated gold-tone hardware |
| Packaging | Bulk cartons, counted packs or matched gold-tone furniture hardware kits |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after length, thread, coating color and furniture assembly are confirmed |
| OEM / ODM | Length, thread pitch, head, drive, material, finish color and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Gold-tone furniture brackets
Match head seating and coating color to the approved bracket and verify pilot hole and engagement in the panel.
Shelf and cabinet supports
Check long-screw clearance, point position, joint thickness and driver access under the shelf.
Visible decorative hardware
Approve finish color and head appearance with the actual fitting under project lighting.
Matched furniture kits
Gold-tone brackets and counted screws can be packed together after the bill of materials is approved.
Buyer Guide: How to Choose
How should the M4 screw length be selected?
Provide the joint stack, required engagement and clearance behind the panel so the pointed end does not interfere with adjacent parts.
Can the thread pitch be customized?
Yes. Send the required pitch, substrate, pilot hole, drawing or approved sample for review.
How is the gold finish approved?
Provide an approved color or coating sample, appearance range, service environment and any agreed test method.
What should be checked for a visible head?
Confirm head diameter, height, recess quality, seating, surrounding clearance and color match with the fitting.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
M4 diameter and length
Check diameter, length datum and critical tolerances against the approved drawing or sample.
Thread and pointed end
Review fully threaded form, customized pitch, point geometry and runout for the confirmed pilot hole.
Cross-drive engagement
Use the agreed driver or gauge to check recess fit, seating and installation access.
Gold finish appearance
Inspect color, visible coverage and head appearance against the approved finish sample; define any coating test in the order.
Furniture trial and packaging
Verify engagement, point clearance, matched hardware, pack count, labels and carton identification as agreed.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
What length is supplied for this M4 gold zinc plated screw?
No single length is assumed from the product images. Confirm the required length and tolerance according to the drawing, sample or purchase specification.
Can length and thread pitch be customized?
Yes. Provide the M4 pitch, target length, substrate and pilot-hole condition. MOQ starts at 10,000 pcs per confirmed specification.
Will the gold finish exactly match my furniture bracket?
Color can vary by coating specification and viewing condition. Approve a finish sample together with the actual bracket before bulk production.
How should point clearance be checked?
Provide joint thickness and surrounding geometry, then verify the screw in the complete furniture assembly.
Can gold-tone brackets be packed with the screws?
Yes. Confirm each component, finish, quantity per kit, label, inner pack and carton requirement.
What information is needed for a quotation?
Send M4 pitch, length, furniture material, pilot hole, finish sample, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M4 x 14mm Pan Head Self-Tapping Screw
- Black and Silver Cabinet Self-Tapping Screws
- M5 x 30mm Pan Head Self-Tapping Screw
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
This M4 gold zinc plated screw has a low pan head, cross drive and long pointed fully threaded shank. Confirm length, pitch and coating by specification.
