Black Cross-Drive Wide Pan Head Self-Tapping Screw — Black short pointed coarse-thread screws shown with broad low rounded heads and cross recesses. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black short pointed coarse-thread screws shown with broad low rounded heads and cross recesses. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Wide Pan Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Black short pointed coarse-thread screws shown with broad low rounded heads and cross recesses. |
| Primary Form | Wide low pan or truss-style head with a cross drive, coarse thread and pointed end shown. |
| Head / Interface | Confirm head diameter and height, underside bearing surface, cross recess, driver size and clearance. |
| Thread / Mating Part | Short coarse self-tapping thread shown; confirm diameter, profile, length, point, pilot hole and substrate. |
| Current Appearance | Black surface appearance shown; confirm base material, finish system, service environment and acceptance sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, thickness, pilot hole, joint stack, edge distance, head clearance and driving method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Separated bags, trays or private-label packs can be reviewed to protect broad heads and prevent mixed sizes. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Cabinet brackets and hardware | Match broad-head bearing, pilot hole and substrate to the joint. |
|---|---|
| Thin panel attachments | Confirm head clearance, panel thickness and backside condition. |
| Plastic or wood component fastening | Validate the pilot hole and thread-forming behavior in the actual substrate. |
| OEM hardware packs | Control size, finish, count, label and compartments. |
Buyer Guide
| What is the benefit of the wide head? | Its bearing area may suit the joint, but head geometry and substrate must be confirmed. |
|---|---|
| How is the pilot hole selected? | Use thread profile, point, substrate, thickness and installation trial. |
| Does black color prove a coating type? | No. Confirm base material and finish separately. |
| Can pull-out performance be assumed? | No. Define the substrate, engagement and test method. |
Quality Control
| Wide head and drive | Inspect diameter, height, underside, recess and driver fit. |
|---|---|
| Thread and point | Check profile, length, point geometry and straightness. |
| Substrate trial | Verify starting, driving, seating, panel condition and removal. |
| Pack audit | Check item code, finish, count, label and package separation. |
Packaging & Customization
| Packaging Format | Separated bags, trays or private-label packs can be reviewed to protect broad heads and prevent mixed sizes. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| What is the benefit of the wide head? | Its bearing area may suit the joint, but head geometry and substrate must be confirmed. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Separated bags, trays or private-label packs can be reviewed to protect broad heads and prevent mixed sizes. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head dimensions, underside and driver size |
| RFQ 3 | Thread profile, point, length and pilot hole |
| RFQ 4 | Substrate, thickness, joint stack and engagement |
| RFQ 5 | Material, black finish and test method |
| RFQ 6 | Quantity, label, compartments and cartons |
MOQ: 10,000 pcs per confirmed specification
