Silver Cross-Drive Pan Head Self-Tapping Screw — Silver pointed coarse-thread screws shown with low rounded pan heads and cross recesses. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver pointed coarse-thread screws shown with low rounded pan heads and cross recesses. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Pan Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Silver pointed coarse-thread screws shown with low rounded pan heads and cross recesses. |
| Primary Form | Low pan head with a cross drive, fully threaded shank and sharp point shown. |
| Head / Interface | Confirm head diameter and height, cross recess, driver size, underside bearing surface and clearance. |
| Thread / Mating Part | Pointed self-tapping thread shown; confirm diameter, profile, length, point, pilot hole and substrate. |
| Current Appearance | Bright silver metallic appearance shown; confirm base material, finish system, environment and visual acceptance. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate and thickness, pilot hole, joint stack, edge distance, penetration, driver and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Separated bags, trays or private-label packs can be reviewed with approved sizes, counts, labels and cartons. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Light panel and bracket fastening | Match pilot hole, engagement and head clearance to the joint. |
|---|---|
| Cabinet and fixture hardware | Confirm substrate, edge distance, driver access and seating. |
| Small component assembly | Validate thread-forming behavior in the actual material. |
| OEM screw packs | Control size, finish, count, label and compartments. |
Buyer Guide
| How is the pilot hole selected? | Use the confirmed thread profile, point, substrate, thickness and installation trial. |
|---|---|
| Can the photo confirm stainless steel? | No. Confirm material grade and finish separately. |
| How is head clearance checked? | State surrounding diameter, height, seating surface and driver access. |
| Can tightening torque be assumed? | No. Define the joint, substrate, installation method and acceptance test. |
Quality Control
| Pan head and drive | Inspect diameter, height, recess, underside and driver fit. |
|---|---|
| Thread and point | Check profile, length, point geometry and straightness. |
| Substrate trial | Verify starting, driving, seating, material condition and removal. |
| Pack audit | Check item identity, finish, count, label and carton. |
Packaging & Customization
| Packaging Format | Separated bags, trays or private-label packs can be reviewed with approved sizes, counts, labels and cartons. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| How is the pilot hole selected? | Use the confirmed thread profile, point, substrate, thickness and installation trial. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Separated bags, trays or private-label packs can be reviewed with approved sizes, counts, labels and cartons. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head dimensions and driver size |
| RFQ 3 | Thread profile, point, length and pilot hole |
| RFQ 4 | Substrate, thickness, joint stack and engagement |
| RFQ 5 | Material, finish and test method |
| RFQ 6 | Quantity, package, label and cartons |
MOQ: 10,000 pcs per confirmed specification
