Silver Cross-Drive Low Pan Head Self-Tapping Screw — Silver pointed coarse-thread screws shown with low rounded heads and cross-drive recesses. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver pointed coarse-thread screws shown with low rounded heads and cross-drive recesses. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Low Pan Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Silver pointed coarse-thread screws shown with low rounded heads and cross-drive recesses. |
| Primary Form | Low rounded pan head with a cross drive, long fully threaded shank and sharp point shown. |
| Head / Interface | Confirm head diameter and height, cross recess, driver size, bearing surface, seating and surrounding clearance. |
| Thread / Mating Part | Long pointed self-tapping thread shown; confirm diameter, profile, length, point, pilot hole and substrate. |
| Current Appearance | Bright metallic appearance shown; confirm material, finish system, service environment and acceptance sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, thickness, pilot hole, joint stack, edge distance, embedment, driver and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Separated bags, trays, bulk cartons or private-label packs can be reviewed with controlled sizes, counts and labels. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Cabinet and furniture panel fastening | Confirm pilot hole, engagement, edge distance and head clearance. |
|---|---|
| Fixture and bracket installation | Match thread, point, joint stack and driver access. |
| Wood or board component assembly | Validate starting and seating in the actual substrate. |
| OEM fastener packs | Control part identity, finish, count, label and package. |
Buyer Guide
| How is screw length selected? | Use joint stack, required engagement, substrate thickness and backside clearance. |
|---|---|
| How is the pilot hole selected? | Use thread profile, point, substrate, edge distance and installation trial. |
| Does bright color confirm material grade? | No. Confirm base material and finish separately. |
| Can one screw be used for every board? | No. Confirm thread and point against the actual substrate and joint. |
Quality Control
| Low pan head | Inspect diameter, height, recess, bearing surface and driver fit. |
|---|---|
| Thread and point | Check profile, length, point, runout and straightness. |
| Installation trial | Verify starting, driving, seating, substrate condition and removal. |
| Packaging control | Check size, finish, count, label, package closure and cartons. |
Packaging & Customization
| Packaging Format | Separated bags, trays, bulk cartons or private-label packs can be reviewed with controlled sizes, counts and labels. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| How is screw length selected? | Use joint stack, required engagement, substrate thickness and backside clearance. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Separated bags, trays, bulk cartons or private-label packs can be reviewed with controlled sizes, counts and labels. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head dimensions and cross-drive size |
| RFQ 3 | Thread profile, point, length and pilot hole |
| RFQ 4 | Substrate, thickness, joint stack and engagement |
| RFQ 5 | Material, finish and installation test |
| RFQ 6 | Quantity, pack format, label and cartons |
MOQ: 10,000 pcs per confirmed specification
