Black Ultra-Thin Wide-Head Machine Screw — Black short machine screws shown with very wide, thin cross-drive heads, full uniform threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black short machine screws shown with very wide, thin cross-drive heads, full uniform threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Ultra-Thin Wide-Head Machine Screw |
|---|---|
| Current Product Configuration | Black short machine screws shown with very wide, thin cross-drive heads, full uniform threads and blunt ends. |
| Primary Form | Ultra-low-profile wide-head machine screw that spreads clamp contact while limiting head projection. |
| Head / Interface | Confirm head diameter and thickness, crown and edge profile, bearing face, cross-drive form and depth, under-head radius and access. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch, class, threaded length, blunt end, mating nut or tapped hole and engagement. |
| Current Appearance | Matte black appearance is shown; confirm base material, finish process, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating thread, joint stack, clearance hole, bearing surface, driver access, tightening method and buyer criteria. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Low-profile enclosure panels | Confirm head clearance, bearing area and mating thread. |
|---|---|
| Electronic equipment frames | Coordinate short length, access and visible black finish. |
| Sheet-metal brackets | Review hole, joint stack and clamp surface. |
| OEM counted screw packs | Control thread, length, count, labels and surface protection. |
Buyer Guide
| Which head dimensions matter? | Specify diameter, thickness, crown, edge and bearing-face geometry. |
|---|---|
| How is the mating thread selected? | Provide diameter, pitch, class, engagement and production mating part. |
| Can the black appearance define the coating? | No. Confirm the finish process and corrosion requirement. |
| How is low-clearance fit approved? | Provide the assembly section, nearby interference and approved installation trial. |
Quality Control
| Ultra-thin head | Inspect diameter, thickness, flatness, edges, bearing face and recess. |
|---|---|
| Thread and end | Check profile, pitch, length, end condition and mating fit. |
| Assembly trial | Verify clearance, seating, engagement, access and specified tightening test. |
| Pack audit | Confirm variant identity, finish, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Which head dimensions matter? | Specify diameter, thickness, crown, edge and bearing-face geometry. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head and cross-drive geometry |
| RFQ 3 | Thread, length and mating part |
| RFQ 4 | Joint stack, clearance and tightening method |
| RFQ 5 | Material, black finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
