Slotted Double-End Furniture Connector Dowel — Metal connector dowels shown with a rounded capture head, central slotted sleeve section and a coarse threaded panel-entry end. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal connector dowels shown with a rounded capture head, central slotted sleeve section and a coarse threaded panel-entry end. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Slotted Double-End Furniture Connector Dowel |
|---|---|
| Current Product Configuration | Metal connector dowels shown with a rounded capture head, central slotted sleeve section and a coarse threaded panel-entry end. |
| Primary Form | Double-end furniture dowel intended to engage a prepared panel and present a capture head to a compatible cam or quick-connect interface. |
| Head / Interface | Confirm capture-head profile, neck and shoulder, central slot length and width, shank diameter, panel-entry end and insertion tool interface. |
| Thread / Mating Part | Confirm panel-entry thread diameter, form and length, pilot hole, engagement, matched cam or connector and required center distance. |
| Current Appearance | Bright silver-colored variants and red or black central sleeve examples are shown; confirm materials, finish, sleeve color and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials and thicknesses, pilot and edge holes, center distances, matched cam, insertion depth, driver and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Coordinate the dowel, cam and panel machining as one system. |
|---|---|
| Table and shelf panel assembly | Confirm capture geometry, insertion depth and tightening access. |
| Replacement connector dowels | Compare the head, slot, thread and center distance with approved samples. |
| OEM dowel component packs | Control variant, matched-part ratio, labels and protection. |
Buyer Guide
| Which panel machining data are required? | Provide materials, thicknesses, pilot holes, edge bores, center distances and tolerances. |
|---|---|
| How is the capture head approved? | Confirm head, neck, shoulder and matched cam engagement by drawing or sample. |
| What is the central slot used for? | Its production function and dimensions must be confirmed against the approved connector system. |
| Can the photographed sleeve colors define the order? | No. Confirm material, color standard, finish and approved sample. |
Quality Control
| Head and central sleeve | Inspect capture head, neck, shoulder, slot, straightness and visible defects. |
|---|---|
| Panel-entry thread | Check diameter, form, length, point or end and damage. |
| Matched joint trial | Verify panel insertion, cam capture, alignment and buyer-specified test. |
| Finish and pack audit | Confirm variant, surface, sleeve color, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which panel machining data are required? | Provide materials, thicknesses, pilot holes, edge bores, center distances and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Dowel drawing or approved sample |
|---|---|
| RFQ 2 | Matched cam or quick-connect component |
| RFQ 3 | Panel materials, thicknesses and hole layout |
| RFQ 4 | Thread, insertion depth and center distance |
| RFQ 5 | Material, finish, sleeve color and test criteria |
| RFQ 6 | Quantity, component ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
