Black and Silver Wide Pan Head Self-Tapping Screws — Black and silver cross-drive screws shown with broad low-profile pan heads, coarse short threads and pointed ends. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black and silver cross-drive screws shown with broad low-profile pan heads, coarse short threads and pointed ends. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black and Silver Wide Pan Head Self-Tapping Screws |
|---|---|
| Current Product Configuration | Black and silver cross-drive screws shown with broad low-profile pan heads, coarse short threads and pointed ends. |
| Primary Form | Wide pan-style head with a cross recess, coarse self-tapping thread and sharp point shown in black and silver appearances. |
| Head / Interface | Confirm head diameter, height and underside, cross recess and bit, bearing area, clearance and driver access. |
| Thread / Mating Part | Coarse short thread and pointed end shown; confirm diameter, profile, threaded length, point, pilot hole and engagement. |
| Current Appearance | Black and silver metallic appearances shown; confirm base material, finish systems, color and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm board, wood, plastic or approved substrate, thickness, pilot hole, edge distance, engagement, driver and seating. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Black, silver or separated variant packs can be reviewed with approved sizes, counts, labels and carton protection. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Cabinet hardware fastening | Confirm bearing area, clearance, substrate and pilot hole. |
|---|---|
| Bracket and thin-component retention | Match head coverage and engagement to the component hole. |
| Color-separated hardware programs | Approve black and silver finish samples and item coding. |
| OEM furniture screw packs | Control variant, size, count, label and compartment separation. |
Buyer Guide
| Why is the wide head important? | Head diameter and underside control coverage and bearing on the retained component. |
|---|---|
| Can black and silver screws share one specification? | Only if material, geometry and performance requirements are confirmed for each finish variant. |
| How is the pilot hole selected? | Use thread profile, substrate material, thickness, edge distance and installation trial. |
| Can the photographed colors identify the finish process? | No. Confirm each finish system and service requirement separately. |
Quality Control
| Wide pan head | Inspect diameter, height, underside, recess, bit fit and seating. |
|---|---|
| Thread and point | Check thread form, length, point, straightness and transitions. |
| Substrate installation | Verify pilot hole, driving, seating, engagement and removal. |
| Variant and pack audit | Confirm color variant, approved finish, size, count, label and separation. |
Packaging & Customization
| Packaging Format | Black, silver or separated variant packs can be reviewed with approved sizes, counts, labels and carton protection. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Why is the wide head important? | Head diameter and underside control coverage and bearing on the retained component. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Black, silver or separated variant packs can be reviewed with approved sizes, counts, labels and carton protection. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved samples |
|---|---|
| RFQ 2 | Wide head and cross-drive geometry |
| RFQ 3 | Diameter, thread, point and length |
| RFQ 4 | Substrate, component hole, pilot hole and joint stack |
| RFQ 5 | Material, black or silver finish and test method |
| RFQ 6 | Variant quantities, labels, compartments and cartons |
MOQ: 10,000 pcs per confirmed specification
