Rose-Gold-Toned Cross-Drive Countersunk Self-Tapping Screw — Rose-gold-toned cross-drive countersunk screws shown with a coarse full-length thread and pointed end in several photographed forms. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Rose-gold-toned cross-drive countersunk screws shown with a coarse full-length thread and pointed end in several photographed forms. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Rose-Gold-Toned Cross-Drive Countersunk Self-Tapping Screw |
|---|---|
| Current Product Configuration | Rose-gold-toned cross-drive countersunk screws shown with a coarse full-length thread and pointed end in several photographed forms. |
| Primary Form | Flat countersunk head with a cross recess, coarse thread and pointed self-tapping form shown. |
| Head / Interface | Confirm head diameter, countersink angle, cross recess and bit, seating depth, surface condition and driver access. |
| Thread / Mating Part | Coarse full-length thread and pointed end shown; confirm diameter, profile, pitch, point, pilot hole and engagement. |
| Current Appearance | Rose-gold-toned metallic appearance shown; confirm base material, finish system, color range and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm wood, board or other approved substrate, thickness, pilot hole, edge distance, embedment, seating and driver. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, bagged or private-label packs can be reviewed with approved size groups, counts, labels and carton protection. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Flush-seated wood or board joints | Match the countersink, pilot hole and embedment to the actual substrate. |
|---|---|
| Furniture and cabinet assembly | Confirm head clearance, edge distance and visible-finish requirement. |
| Decorative hardware fastening | Approve the finish color range together with the installed hardware. |
| OEM screw packs | Control size, count, label, lot separation and carton protection. |
Buyer Guide
| Does the rose-gold tone define the coating? | No. Confirm the base material, finish process, color sample and required service condition. |
|---|---|
| How is countersunk seating checked? | Review head profile, pilot hole, substrate condition, depth and driver alignment. |
| Can one pilot hole suit every size? | No. Match it to diameter, thread, point, substrate density and edge distance. |
| Can corrosion performance be assumed from color? | No. Define the finish specification, environment and acceptance test. |
Quality Control
| Head and cross drive | Inspect countersink profile, recess, bit fit, seating face and visible finish. |
|---|---|
| Thread and point | Check thread profile, threaded length, point, straightness and transitions. |
| Substrate trial | Verify driving, seating, splitting risk, engagement and removal. |
| Finish and pack audit | Compare approved color and inspect counts, labels and surface protection. |
Packaging & Customization
| Packaging Format | Bulk, bagged or private-label packs can be reviewed with approved size groups, counts, labels and carton protection. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Does the rose-gold tone define the coating? | No. Confirm the base material, finish process, color sample and required service condition. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, bagged or private-label packs can be reviewed with approved size groups, counts, labels and carton protection. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved samples |
|---|---|
| RFQ 2 | Head profile and cross-drive details |
| RFQ 3 | Diameter, thread, point and length |
| RFQ 4 | Substrate, pilot hole, joint section and edge distance |
| RFQ 5 | Material, finish color, environment and test method |
| RFQ 6 | Quantity, pack count, label and carton requirements |
MOQ: 10,000 pcs per confirmed specification
