Round-Recess Furniture Leg Mounting Plate — Square metallic mounting plates shown with a pressed central round recess, raised center interface and four corner fixing holes in several photographed finishes. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Square metallic mounting plates shown with a pressed central round recess, raised center interface and four corner fixing holes in several photographed finishes. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Round-Recess Furniture Leg Mounting Plate |
|---|---|
| Current Product Configuration | Square metallic mounting plates shown with a pressed central round recess, raised center interface and four corner fixing holes in several photographed finishes. |
| Primary Form | Furniture leg or frame mounting plate intended to fasten to a confirmed panel and receive a compatible leg connector or threaded member. |
| Head / Interface | Confirm plate outline and thickness, center recess and interface, corner-hole pattern, edge form, seating face, leg geometry and installation access. |
| Thread / Mating Part | A center interface is visible; confirm whether it is threaded, its diameter, pitch, class, engagement and the mating leg or connector. |
| Current Appearance | Silver, yellow-toned and black photographed variants are shown; confirm base material, surface process, color range and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and thickness, leg geometry, fixing-hole layout, separate fasteners, center engagement, load direction and buyer-specified assembly test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Sofa leg mounting | Match the plate, leg interface, panel and fixing pattern to the approved frame. |
|---|---|
| Table leg attachment | Confirm center engagement, plate seating and surrounding clearance. |
| Furniture frame repair kits | Compare the existing plate, holes and mating leg with an approved sample. |
| OEM leg-hardware packs | Control plate variant, fastener ratio, labels and surface protection. |
Buyer Guide
| Which leg data are required? | Provide the leg connector, center interface, engagement, panel section and assembly drawing. |
|---|---|
| How are the corner holes approved? | Confirm hole count, diameter, spacing, edge distance and separate fixing fasteners. |
| Can a load rating be inferred from the image? | No. State the complete furniture geometry, installation and buyer-specified test method. |
| Do the photographed finishes define the order? | No. Confirm base material, finish system, color range and approved sample. |
Quality Control
| Plate geometry | Inspect outline, thickness, center recess, flatness, edges and visible defects. |
|---|---|
| Center and hole interfaces | Check center geometry or thread plus corner-hole diameter, position and burrs. |
| Furniture assembly trial | Verify panel seating, leg engagement, fastener access and buyer-specified test. |
| Finish and pack audit | Confirm variant, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which leg data are required? | Provide the leg connector, center interface, engagement, panel section and assembly drawing. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Plate drawing or approved sample |
|---|---|
| RFQ 2 | Center interface and mating furniture leg |
| RFQ 3 | Panel material, thickness and fixing-hole layout |
| RFQ 4 | Separate fasteners and installation method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
