Angled Double-Head Furniture Connector Bolt — Silver-colored angled connector links shown with a long straight shank, rounded capture ends and an offset short pin joined near one end. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored angled connector links shown with a long straight shank, rounded capture ends and an offset short pin joined near one end. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Angled Double-Head Furniture Connector Bolt |
|---|---|
| Current Product Configuration | Silver-colored angled connector links shown with a long straight shank, rounded capture ends and an offset short pin joined near one end. |
| Primary Form | Special furniture connector bolt intended to link two confirmed mating interfaces at an approved angle or offset. |
| Head / Interface | Confirm long-link length and section, bend or joint angle, offset-pin length, both head profiles, shoulders, clearances and assembly direction. |
| Thread / Mating Part | No production thread is confirmed from the photographs; specify any threaded, captured or press-fit interfaces and their mating parts independently. |
| Current Appearance | Bright silver-colored metallic surface is shown; confirm base material, finish system, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both mating connectors or panel holes, joint angle and stack, insertion sequence, required movement, service direction and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Special furniture linkage joints | Coordinate both capture heads and the approved joint angle. |
|---|---|
| Panel connector mechanisms | Confirm insertion path, clearances and retained movement. |
| Replacement offset connector bolts | Compare both ends, link length and angle with an approved sample. |
| OEM mechanism component packs | Control connector identity, mating parts, labels and protection. |
Buyer Guide
| Which mating-part data are required? | Provide both mating interfaces, hole or slot geometry, joint section and assembly sequence. |
|---|---|
| How is the angle approved? | Confirm the full connector geometry, datum scheme and tolerances by drawing or sample. |
| Can material or strength be inferred from the title? | No. State material, heat treatment if required and buyer-specified test criteria. |
| Can the pictured dimensions define production? | No. Approve all lengths, offsets, heads, shoulders and tolerances. |
Quality Control
| Link and angle geometry | Inspect lengths, offset, angle, straightness, transitions and visible defects. |
|---|---|
| Head and shoulder interfaces | Check both capture heads, pins, shoulders, radii and burrs. |
| Mating assembly trial | Verify insertion, capture, clearances, movement and buyer-specified test. |
| Finish and pack audit | Confirm selected variant, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which mating-part data are required? | Provide both mating interfaces, hole or slot geometry, joint section and assembly sequence. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Connector drawing or approved sample |
|---|---|
| RFQ 2 | Both mating interfaces and joint section |
| RFQ 3 | Lengths, offset, angle, heads and tolerances |
| RFQ 4 | Assembly sequence and required movement |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, mating-part ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
