Cross-Drive Countersunk Coarse-Thread Screw — Black pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Countersunk Coarse-Thread Screw |
|---|---|
| Current Product Configuration | Black pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. |
| Primary Form | Coarse-thread screw intended to seat flush in a confirmed wood-based panel, fixture or compatible prepared substrate. |
| Head / Interface | Confirm countersunk-head angle, diameter and height, cross-drive type and depth, bearing transition, recess and tool clearance. |
| Thread / Mating Part | Confirm thread diameter and form, pitch, threaded length, point geometry, pilot-hole requirement, substrate engagement and edge distance. |
| Current Appearance | Uniform black surface is shown; confirm base material, black finish system, appearance range, environment and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate material and thickness, pilot or prepared hole, fixture stack, countersink, edge distance, driver and buyer-specified installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Black furniture-frame fastening | Coordinate the screw, prepared hole and confirmed panel or frame. |
|---|---|
| Bracket-to-panel assembly | Confirm fitting hole, countersink, engagement and driver access. |
| Interior fixture installation | Approve substrate, edge distance and finish requirement. |
| OEM black screw packs | Control thread variants, counts, labels and surface protection. |
Buyer Guide
| Which substrate data are required? | Provide material, thickness, grade where relevant, hole preparation and joint section. |
|---|---|
| How is the countersunk head approved? | Confirm head angle, diameter, recess and finished seating surface by drawing or sample. |
| Does the black color define corrosion performance? | No. State the finish process, environment and acceptance criteria. |
| Can installation performance be inferred from the image? | No. State the substrate, hole, joint and buyer-specified test method. |
Quality Control
| Head and cross drive | Inspect angle, diameter, recess, seating face and burrs. |
|---|---|
| Coarse thread and point | Check diameter, form, pitch, straightness, point and thread damage. |
| Substrate installation trial | Verify entry, thread engagement, seating and buyer-specified test. |
| Black finish and pack audit | Confirm surface, color range, item count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which substrate data are required? | Provide material, thickness, grade where relevant, hole preparation and joint section. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread and point specification |
| RFQ 3 | Substrate material, thickness and prepared hole |
| RFQ 4 | Fixture stack, countersink and installation method |
| RFQ 5 | Material, black finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
