Cross-Drive Wide-Head Machine Screw — Yellow-toned screws shown with broad low-profile heads, cross recesses, full machine threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Yellow-toned screws shown with broad low-profile heads, cross recesses, full machine threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Wide-Head Machine Screw |
|---|---|
| Current Product Configuration | Yellow-toned screws shown with broad low-profile heads, cross recesses, full machine threads and blunt ends. |
| Primary Form | Wide-head machine screw intended to spread bearing contact over a confirmed furniture bracket, equipment panel or slotted metal joint. |
| Head / Interface | Confirm wide-head diameter, height and underside profile, cross-drive type and depth, bearing surface, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch and class, threaded length, end form, mating nut, insert or tapped hole and minimum engagement. |
| Current Appearance | Yellow-toned metallic surface is shown; confirm base material, finish process, appearance range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm the mating nut, insert or tapped hole, joint stack, clearance hole, seating surface, driver, access and buyer-specified tightening test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Furniture bracket assembly | Match the wide head and mating thread to the bracket and panel stack. |
|---|---|
| Equipment panel fastening | Confirm head bearing, clearance hole and thread engagement. |
| Slotted metal-frame joints | Coordinate head diameter, slot width and tool access. |
| OEM machine-screw packs | Control thread variants, count, labels and finish protection. |
Buyer Guide
| Why use a wide head? | Approve the bearing area and head profile against the actual bracket, slot and surrounding clearance. |
|---|---|
| Which mating-thread data are required? | Provide the nut, insert or tapped-hole thread, class, engagement and joint stack. |
| Does the yellow-toned appearance define the finish? | No. Confirm base material, finish process, environment and acceptance criteria. |
| Can tightening performance be inferred from the image? | No. State the complete joint and buyer-specified test method. |
Quality Control
| Wide head and cross drive | Inspect diameter, height, underside profile, recess, bearing face and burrs. |
|---|---|
| Machine thread | Check diameter, pitch, class, length, end profile and thread damage. |
| Mating assembly trial | Verify fit, head seating, engagement, tool access and buyer-specified test. |
| Finish and pack audit | Confirm surface, thread identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Why use a wide head? | Approve the bearing area and head profile against the actual bracket, slot and surrounding clearance. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive and machine-thread specification |
| RFQ 3 | Mating nut, insert or tapped-hole specification |
| RFQ 4 | Joint stack, clearance hole and installation method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
