B2B product specification
M4 x 12mm Black Cross-Drive Flange Head Self-Tapping Screw
This M4 x 12mm black self-tapping screw has a broad low flange head, cross drive and pointed coarse-thread shank for confirmed pilot-hole assemblies.
- M4 x 12mm size stated in product information
- Black surface appearance
- Broad low pan / flange-style head with cross drive
- Pointed coarse-thread shank shown
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
This M4 x 12mm black self-tapping screw is shown with a broad low pan or flange-style head, cross drive and short pointed coarse-thread shank. The broad bearing area can support brackets and clips, while the ordered black coating and base material must be confirmed rather than inferred from appearance.
For a B2B quotation, provide the substrate, panel or bracket thickness, pilot-hole diameter, required thread engagement, head clearance, drawing or approved sample, finish, quantity and packaging. Verify seating and pull-out requirements in the real assembly before bulk approval.
Procurement note: Specify the panel or bracket material, thickness, pilot-hole condition, required engagement, head seating, black finish, quantity and packaging.
Technical Specifications
| Product Type | Short pointed black self-tapping screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Black appearance shown; confirm coating system, color sample and service environment |
| Diameter | M4 stated in product information |
| Length | 12mm stated in product information; confirm length datum and tolerance |
| Head Type | Broad low pan / flange-style head shown |
| Drive Type | Cross drive |
| Thread Type | Coarse-thread appearance shown; pitch can be customized according to customer requirement |
| Point Type | Pointed end shown; confirm point geometry and pilot-hole condition |
| Pilot Hole | Confirm diameter and tolerance for the selected substrate and thickness |
| Application | Furniture brackets, appliance clips, cable routing and light-gauge panel fittings |
| Packaging | Bulk cartons, counted packs or matched black hardware kits |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after substrate, pilot hole, finish and bracket are confirmed |
| OEM / ODM | Length, pitch, point, head, material, black finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Black furniture brackets
Match the head bearing area to the bracket hole and verify pilot hole, engagement and edge distance in the panel.
Appliance cable clips
Check clip thickness, sheet-metal pilot hole, cable clearance and driver access.
Painted equipment panels
Approve the black finish together with the panel and confirm that head seating does not damage the coating.
Matched black hardware kits
Brackets, clips and counted screws can be packed together after the bill of materials is approved.
Buyer Guide: How to Choose
How should the pilot hole be selected?
Provide the substrate, thickness, hardness and required engagement, then verify the chosen pilot hole in a representative assembly.
What should be checked for the broad head?
Confirm head diameter, height, bearing area, recess geometry and clearance within the bracket or clip.
How should the black finish be approved?
Provide an approved color or coating sample, service environment and any agreed inspection or test method.
Can the pitch or point be customized?
Yes. Send the substrate, pilot hole, pitch, point requirement, drawing or approved sample for review.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
M4 diameter and 12mm length
Check diameter, length datum and critical tolerances against the approved drawing.
Coarse thread and point
Review pitch, thread form, point geometry and runout against the confirmed pilot-hole condition.
Flange head and cross drive
Check head diameter, height, bearing face, recess fit and driver engagement.
Black finish appearance
Inspect color, visible coverage and head appearance against the approved finish sample; define any coating test in the order.
Assembly and pack verification
Complete the agreed bracket or clip trial and verify count, labels, matched hardware and carton marks.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
Is this M4 x 12mm black self-tapping screw suitable for particle board?
Suitability depends on board density, edge distance, pilot hole and required holding performance. Test the confirmed screw in the actual panel.
Can the thread pitch and point be customized?
Yes. Provide the substrate, pilot hole, pitch and point requirement. MOQ starts at 10,000 pcs per confirmed specification.
Is the pictured head flat or countersunk?
The images show a broad low pan or flange-style head, not a conventional countersunk profile. Confirm head geometry from the approved drawing.
Will the black finish match my bracket?
Approve a coating or color sample together with the actual bracket because appearance can vary by specification and lighting.
Can clips or brackets be packed with the screws?
Yes. Confirm every component, quantity per kit, label, barcode, inner pack and carton requirement.
What information is needed for a quotation?
Send M4 x 12mm specification, substrate, pilot hole, fitting, finish, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M3 Short Pan Head Thread-Forming Screw
- M4 Gold Zinc-Plated Self-Tapping Screw
- M4 x 24mm Pan Head Fully Threaded Screw
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
This M4 x 12mm black self-tapping screw has a broad low flange head, cross drive and pointed coarse-thread shank for confirmed pilot-hole assemblies.
