Low-Profile Hex-Socket Machine Screw — Bright silver-colored screws shown with broad low rounded heads, internal hex drives, uniform full machine threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored screws shown with broad low rounded heads, internal hex drives, uniform full machine threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Low-Profile Hex-Socket Machine Screw |
|---|---|
| Current Product Configuration | Bright silver-colored screws shown with broad low rounded heads, internal hex drives, uniform full machine threads and blunt ends. |
| Primary Form | Low-profile machine screw intended to clamp a confirmed joint while engaging a nut, insert or tapped hole. |
| Head / Interface | Confirm head diameter and height, top radius, hex-drive size and depth, bearing face, under-head transition, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch and class, threaded length, end profile, mating thread and required engagement. |
| Current Appearance | Bright silver-colored finish is shown; confirm base material, finish system, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating nut, insert or tapped hole, joint stack, clearance hole, seating surface, driver, tightening method and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Low-clearance furniture hardware | Coordinate head height, driver access and mating thread. |
|---|---|
| Metal bracket assembly | Confirm bearing surface, joint stack and engagement. |
| Equipment panel joints | Match thread class, clearance hole and tightening method. |
| OEM machine-screw packs | Control thread variants, count, labels and surface protection. |
Buyer Guide
| Which mating-thread data are required? | Provide nut, insert or tapped-hole thread, class, engagement and joint stack. |
|---|---|
| How is the low head approved? | Confirm head envelope, tool clearance, bearing face and surrounding hardware by drawing or sample. |
| Can the photographed size define production? | No. Confirm every dimension and tolerance by drawing, sample or purchase specification. |
| Does the silver appearance define the finish? | No. Confirm base material, finish process and corrosion requirement. |
Quality Control
| Head and hex drive | Inspect diameter, height, radius, recess, bearing face and burrs. |
|---|---|
| Machine thread | Check diameter, pitch, class, length, end profile and thread damage. |
| Mating assembly trial | Verify fit, tool access, seating, engagement and buyer-specified tightening test. |
| Finish and pack audit | Confirm surface, thread identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Which mating-thread data are required? | Provide nut, insert or tapped-hole thread, class, engagement and joint stack. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, hex drive, thread and dimensional tolerances |
| RFQ 3 | Mating nut, insert or tapped-hole specification |
| RFQ 4 | Joint stack, clearance hole and installation method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
