B2B product specification
Cross-Drive Pan Head Screw Variants
These cross-drive pan head screw variants show two different geometries: a pointed coarse-thread style and a blunt fully threaded machine-screw style.
- Two distinct screw geometries shown
- Pointed coarse-thread option for confirmed prepared-hole use
- Blunt fully threaded option for a confirmed mating thread
- Cross-drive pan or low-profile heads
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
This product image shows two cross-drive pan head screw variants that must not be treated as one interchangeable specification. One has a pointed coarse-thread shank suited to a confirmed prepared-hole application; the other has a blunt fully threaded machine-screw-type shank for a nut, insert or tapped hole.
Choose one geometry before quotation and provide diameter, length, pitch, point or mating thread, substrate or joint stack, head dimensions, material, finish, quantity and packaging. A mixed photo is not approval to substitute one cross-drive pan head screw for the other.
Procurement note: Select one pictured geometry and specify size, pitch, point or receiving thread, joint material, head requirement, finish, quantity and packaging.
Technical Specifications
| Product Type | Cross-drive pan head screw variants; one geometry must be selected |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Bright silver appearance shown; confirm coating system and service environment |
| Diameter | Confirm according to drawing, sample or purchase specification |
| Length | Confirm according to drawing, sample or purchase specification |
| Head Type | Pan / low-profile head variants shown; confirm selected geometry |
| Drive Type | Cross drive |
| Thread Type | Pointed coarse-thread and blunt fully threaded variants shown; pitch is customer-selectable |
| Point Type | Select pointed lead or blunt machine-screw end according to the assembly |
| Standard | Confirm the standard and edition for the selected geometry |
| Application | Plastic bosses or prepared sheet holes for the pointed variant; nuts, inserts or tapped holes for the blunt variant |
| Packaging | Selected variants packed separately with clear size and geometry identification |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after one geometry and its mating condition are confirmed |
| OEM / ODM | Diameter, length, pitch, point, head, drive, material, finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Pointed variant in a plastic boss
Confirm resin, boss diameter and depth, pilot hole, edge distance and assembly trial.
Pointed variant in prepared sheet
Confirm sheet material, thickness, pilot hole, engagement and pull-out requirement.
Blunt variant with a captive nut
Match pitch and tolerance, then check joint stack, seating and rear clearance.
Variant-controlled hardware kits
Use separate item numbers, bins, labels and inspection samples to prevent mixing.
Buyer Guide: How to Choose
Which variant should I order?
Use the pointed coarse-thread style only for a validated prepared-hole joint; use the blunt style with a confirmed receiving thread.
Can both variants share one item number?
Separate item numbers are recommended because point, pitch, mating feature and performance differ.
How should the head be specified?
Confirm head diameter, height, bearing face, recess and clearance from the approved drawing or sample.
Can pitch and point be customized?
Yes. Provide the mating material or thread, hole condition, target engagement and performance requirement.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Variant identity
Compare point, thread, head and length with the approved golden sample before production and packing.
Pointed-variant thread and lead
Inspect pitch and point geometry and complete the agreed prepared-hole trial.
Blunt-variant thread fit
Gauge the thread and trial it with the specified nut, insert or tapped hole.
Head and cross drive
Check head dimensions, bearing face, recess fit and driver engagement for the selected variant.
Segregation and packing
Verify bin control, item label, count, sample reference and carton marks to prevent mixing.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
Are both pictured screws the same specification?
No. The image shows a pointed coarse-thread variant and a blunt fully threaded variant with different receiving conditions.
Which variant is self-tapping?
Only the pointed geometry may be evaluated for a confirmed prepared-hole application; suitability requires the actual material, hole and trial.
Can size, pitch, point and head be customized?
Yes. Select one geometry and send the application details. MOQ starts at 10,000 pcs per confirmed specification.
Can the variants be packed together?
They can be quoted as a kit only with separate identification and an approved bill of materials; loose mixing is not recommended.
Is carbon steel or zinc plating confirmed?
Material and finish must be confirmed according to drawing, sample or purchase specification.
What is needed to quote a cross-drive pan head screw?
Send selected geometry, size, mating condition, finish, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M4 Silver Pan Head Machine Screw
- Cross-Drive Countersunk Self-Drilling Screw
- M5 x 14mm Black Truss Head Machine Screw
Browse the Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
These cross-drive pan head screw variants show two different geometries: a pointed coarse-thread style and a blunt fully threaded machine-screw style.
