Black Cross-Drive Flange Head Self-Tapping Screw — Black pointed screws shown with cross-drive flange heads, broad integrated bearing faces and full coarse external threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black pointed screws shown with cross-drive flange heads, broad integrated bearing faces and full coarse external threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Flange Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Black pointed screws shown with cross-drive flange heads, broad integrated bearing faces and full coarse external threads. |
| Primary Form | Flange head self-tapping screw for a confirmed substrate where the integrated bearing face spreads clamp contact. |
| Head / Interface | Confirm head and flange diameter, head height, crown, bearing face, cross-drive form and depth, under-head transition and access. |
| Thread / Mating Part | Confirm diameter, pitch or thread form, threaded length, point geometry, pilot-hole requirement, substrate and engagement. |
| Current Appearance | Black surface appearance is shown; confirm base material, finish process, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, pilot or clearance hole, fixture thickness, bearing area, driver, tightening method and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Furniture mounting plates | Use the flange bearing area with the approved plate hole and panel. |
|---|---|
| Black metal brackets | Confirm clamp surface, edge distance and visible finish. |
| Equipment cable retainers | Review head clearance, substrate and service access. |
| OEM assembly packs | Control screw identity, count, labels and surface protection. |
Buyer Guide
| What defines the flange head? | Specify flange diameter, head height, crown, bearing face and recess. |
|---|---|
| Is a separate washer required? | Define the assembly stack and bearing requirement; do not infer a washer from the flange. |
| How is the pilot hole approved? | Use the production substrate, thread form, engagement and installation trial. |
| Can the pictured dimensions define production? | No. Confirm dimensions and tolerances by drawing or approved sample. |
Quality Control
| Flange head and recess | Inspect diameter, height, bearing face, recess, edges and flatness. |
|---|---|
| Thread and point | Check form, pitch, length, point geometry and damage. |
| Installation trial | Verify driving, clamp seating, engagement and buyer-specified test. |
| Variant and pack audit | Confirm identity, finish, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| What defines the flange head? | Specify flange diameter, head height, crown, bearing face and recess. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Flange head and drive geometry |
| RFQ 3 | Thread, point, dimensions and substrate |
| RFQ 4 | Pilot hole, fixture and clamp condition |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
