Black Wide Truss-Head Cross-Drive Machine Screw — Black screws shown with very broad low truss heads, cross drives, uniform machine threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black screws shown with very broad low truss heads, cross drives, uniform machine threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Wide Truss-Head Cross-Drive Machine Screw |
|---|---|
| Current Product Configuration | Black screws shown with very broad low truss heads, cross drives, uniform machine threads and blunt ends. |
| Primary Form | Wide truss-head machine screw intended to spread bearing load over a confirmed fixture while engaging a nut, insert or tapped hole. |
| Head / Interface | Confirm head diameter and height, dome profile, cross-drive type and depth, bearing face, washer requirement and surrounding clearance. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch and class, threaded length, end profile, mating thread and required engagement. |
| Current Appearance | Black surface finish is shown; confirm base material, finish system, color or gloss range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm fixture hole and thickness, joint stack, mating nut, insert or tapped hole, head clearance, driver, tightening method and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Furniture bracket fastening | Use the wide bearing head with a confirmed bracket hole and mating thread. |
|---|---|
| Sheet-metal fixture assembly | Coordinate head clearance, hole size, joint stack and engagement. |
| Black hardware programs | Approve visible color and surface with surrounding components. |
| OEM machine-fastener packs | Control thread variants, count, labels and finish protection. |
Buyer Guide
| Which fixture data are required? | Provide fixture-hole diameter, thickness, bearing surface and clearance around the wide head. |
|---|---|
| How is the mating thread selected? | Confirm nut, insert or tapped-hole thread, class, engagement and tightening method. |
| Does black appearance define the finish? | No. Confirm finish process, color or gloss and corrosion requirement with an approved sample. |
| Can the pictured proportions define production? | No. Confirm all dimensions and tolerances by drawing, sample or purchase specification. |
Quality Control
| Truss head and drive | Inspect diameter, height, dome, recess, bearing face and visible defects. |
|---|---|
| Machine thread | Check diameter, pitch, class, length, end and thread damage. |
| Fixture assembly trial | Verify hole fit, head bearing, tool access, engagement and buyer-specified test. |
| Finish and pack audit | Confirm black appearance, thread identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Which fixture data are required? | Provide fixture-hole diameter, thickness, bearing surface and clearance around the wide head. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Truss head, drive, thread and dimensions |
| RFQ 3 | Fixture hole, joint stack and head clearance |
| RFQ 4 | Mating nut, insert or tapped-hole specification |
| RFQ 5 | Material, black finish and corrosion requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
