Short Cross-Drive Pan Head Thread-Forming Screw — Bright silver-colored short screws shown with small pan heads, cross recesses, compact thread-forming bodies and blunt or tapered entries. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored short screws shown with small pan heads, cross recesses, compact thread-forming bodies and blunt or tapered entries. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Short Cross-Drive Pan Head Thread-Forming Screw |
|---|---|
| Current Product Configuration | Bright silver-colored short screws shown with small pan heads, cross recesses, compact thread-forming bodies and blunt or tapered entries. |
| Primary Form | Short thread-forming screw intended to create or shape a mating thread in a confirmed prepared hole and production material. |
| Head / Interface | Confirm head diameter and height, crown, bearing face, cross-drive form and depth, under-head transition and tool access. |
| Thread / Mating Part | Confirm diameter, forming-lobe or thread geometry, pitch, threaded length, entry form, prepared-hole diameter and engagement. |
| Current Appearance | Bright silver-colored appearance is shown; confirm base material, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate or molded boss, prepared-hole geometry, wall thickness, insertion alignment, driver, tightening method and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Electronics enclosure bosses | Match the thread-forming geometry to the approved boss and hole. |
|---|---|
| Plastic or light-alloy housings | Confirm material, wall thickness, engagement and installation test. |
| Small covers and brackets | Review head clearance, bearing surface and repeated-service need. |
| OEM micro-fastener packs | Control variant identity, count, labels and handling protection. |
Buyer Guide
| Which prepared-hole data are required? | Provide hole diameter, depth, tolerance, boss geometry and production material. |
|---|---|
| Is this a conventional self-tapping screw? | Approve the exact thread-forming geometry and installation behavior by drawing, sample and trial. |
| Can the photographed size define production? | No. Confirm all dimensions and tolerances through the approved specification. |
| How is installation accepted? | State the driver, seating, tightening and buyer-specified forming or retention test. |
Quality Control
| Head and recess | Inspect diameter, height, bearing face, recess, edges and visible surface. |
|---|---|
| Forming thread and entry | Check geometry, pitch, length, entry and damage. |
| Prepared-hole trial | Verify alignment, thread formation, seating and buyer-specified test in representative material. |
| Variant and pack audit | Confirm identity, count, labels and protection for small parts. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which prepared-hole data are required? | Provide hole diameter, depth, tolerance, boss geometry and production material. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive and thread-forming geometry |
| RFQ 3 | Prepared hole, boss and substrate |
| RFQ 4 | Engagement, wall thickness and installation method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
