B2B product specification
M8 x 25mm Low-Profile Hex Socket Screw
This M8 hex socket screw has a stated 25mm length, low-profile rounded head and blunt fully threaded shank. Confirm pitch, material and finish by specification.
- M8 diameter and stated 25mm nominal length
- Low-profile rounded head with internal hex socket
- Blunt, fully threaded shank shown in product images
- Thread pitch, length, material, finish and packaging can be customized
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
This M8 hex socket screw is shown with a low-profile rounded head, internal hex drive and blunt fully threaded shank. The photographed geometry is consistent with fastening into a matching internal thread or nut; it is not described here as a pointed self-tapping screw.
For a B2B M8 hex socket screw quotation, provide the mating thread, required pitch, joint thickness, head clearance, tool access, drawing or approved sample, material, finish, quantity and pack format. Confirm assembly fit before bulk approval.
Procurement note: Specify the mating internal thread or nut, thread pitch, joint thickness, head clearance, hex-key access, material, finish, quantity and packaging.
Technical Specifications
| Product Type | Low-profile hex socket machine screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Bright zinc-plated appearance is shown; confirm coating and service environment |
| Diameter | M8 stated in product information |
| Length | 25mm stated in product information; confirm the drawing datum and tolerance |
| Head Type | Low-profile rounded / flanged head shown in product images |
| Drive Type | Internal hex socket shown in product images |
| Thread Type | Fully threaded shank shown; pitch can be customized according to customer requirement |
| Point Type | Blunt end shown; confirm end chamfer and mating-thread entry |
| Standard | Confirm the applicable dimensional standard and edition in the purchase specification |
| Application | Metal brackets, frames and equipment covers using a mating internal thread or nut |
| Packaging | Bulk cartons or custom counted packs according to purchase specification |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after thread, head-clearance and mating-part requirements are confirmed |
| OEM / ODM | Length, pitch, head geometry, hex socket, material, finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Metal frame and bracket assembly
Confirm mating thread, joint stack, bearing surface, head clearance and hex-key access.
Equipment access plates
Check the low-profile head against panel clearance and repeated tool access in the real enclosure.
Furniture metal connectors
Verify the receiving thread, finish compatibility and required engagement with the confirmed connector.
OEM counted hardware packs
Pack count, label, barcode and compatible washers or nuts can be reviewed after the parts list is approved.
Buyer Guide: How to Choose
How should the M8 thread pitch be selected?
Match the tapped hole or nut and provide the pitch, tolerance and engagement requirement from the drawing or mating sample.
How is the 25mm length measured?
State whether length is measured from the underside of the head and provide joint thickness, required engagement and clearance.
What head-clearance information is required?
Provide maximum head diameter and height, bearing surface, surrounding clearance and hex-key approach angle.
Can the pitch and finish be customized?
Yes. Provide the mating thread, drawing or sample, coating requirement and service environment for feasibility review.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Thread size and pitch
Use the agreed thread gauge or mating component to verify M8 size, customized pitch and fit.
Length and head geometry
Check nominal length, head diameter, head height and bearing surface against the approved drawing.
Hex socket fit
Use the agreed hex key or gauge to review socket dimensions, engagement and tool access.
Mating-thread assembly
Confirm engagement, seating and clearance in the buyer-approved tapped part or nut when specified.
Finish and packaging
Inspect visible finish, pack count, labels and carton identification against the confirmed instruction.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
Is this M8 hex socket screw a pointed self-tapping screw?
The product images show a blunt fully threaded shank intended for a matching internal thread or nut. Confirm the required mating condition from the drawing or sample.
Can the M8 thread pitch be customized?
Yes. Send the required pitch, mating part, tolerance and drawing or sample for review. MOQ starts at 10,000 pcs per confirmed specification.
How should I confirm the 25mm length?
Provide the length datum, joint thickness, required thread engagement and clearance; verify the screw in the actual assembly.
What driver is required?
The product images show an internal hex socket. Confirm the socket dimensions and required key size according to the approved drawing or sample.
Can washers or matching nuts be included?
Yes. State thread, dimensions, material, finish and quantity per pack for each matched component.
What information is needed for a quotation?
Send the M8 pitch, length, head limits, hex drive, mating part, material, finish, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M4 x 35mm Cross-Drive Pan Head Screw
- M3 x 14mm Cross-Drive Pan Head Screw
- M5 x 30mm Pan Head Self-Tapping Screw
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
This M8 hex socket screw has a stated 25mm length, low-profile rounded head and blunt fully threaded shank. Confirm pitch, material and finish by specification.
