Silver Hex Socket Headless Set Screw — Silver-colored headless set screws shown with internal hex drives, uniform external machine threads and several photographed lengths. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored headless set screws shown with internal hex drives, uniform external machine threads and several photographed lengths. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Hex Socket Headless Set Screw |
|---|---|
| Current Product Configuration | Silver-colored headless set screws shown with internal hex drives, uniform external machine threads and several photographed lengths. |
| Primary Form | Headless machine-thread set screw for a confirmed shaft, hub, collar or adjustment interface. |
| Head / Interface | Confirm internal hex size and depth, outside thread runout, body length, end form, entry chamfer and tool access. |
| Thread / Mating Part | Confirm diameter, pitch, class, direction, full threaded length, mating tapped hole, engagement and shaft or contact interface. |
| Current Appearance | Bright silver-colored appearance is shown; confirm base material, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating component, tapped-hole depth, contact point, hex key, tightening method, retention method and buyer criteria. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Shaft collar positioning | Confirm contact end, shaft surface, engagement and tightening method. |
|---|---|
| Gear and hub retention | Coordinate tapped hole, shaft geometry and service access. |
| Fixture and adjustment mechanisms | Specify repeated-adjustment need and end condition. |
| OEM service packs | Control thread, length, end form, count and labels. |
Buyer Guide
| Which end form is required? | Specify the contact end by drawing or approved sample; do not infer it from a group image. |
|---|---|
| What thread information is needed? | Provide diameter, pitch, class, engagement and the actual tapped part. |
| How is retention approved? | State tightening, locking method, service condition and buyer acceptance test. |
| Can the pictured length define production? | No. Confirm length and tolerances by drawing or purchase specification. |
Quality Control
| Socket and body | Inspect socket size and depth, concentricity, chamfer and visible surface. |
|---|---|
| Thread and contact end | Check profile, pitch, class, length, runout and specified end form. |
| Mating-component trial | Verify tool fit, engagement, contact and buyer-specified tightening or retention test. |
| Variant and pack audit | Confirm thread, length, end form, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Which end form is required? | Specify the contact end by drawing or approved sample; do not infer it from a group image. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Set screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread, length, socket and end form |
| RFQ 3 | Tapped hole, shaft or contact interface |
| RFQ 4 | Tightening and retention method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
