Black Cross-Drive Pan Head Self-Tapping Screw — Black short pointed screws shown with rounded pan heads, cross recesses, broad bearing faces and full coarse threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black short pointed screws shown with rounded pan heads, cross recesses, broad bearing faces and full coarse threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Pan Head Self-Tapping Screw |
|---|---|
| Current Product Configuration | Black short pointed screws shown with rounded pan heads, cross recesses, broad bearing faces and full coarse threads. |
| Primary Form | Pan head self-tapping screw for a confirmed substrate, pilot-hole condition and clamp surface. |
| Head / Interface | Confirm head diameter and height, crown, bearing face, cross-drive form and depth, under-head radius and tool access. |
| Thread / Mating Part | Confirm diameter, pitch or thread form, threaded length, point geometry, pilot-hole requirement, substrate and engagement. |
| Current Appearance | Black surface appearance is shown; confirm base material, finish process, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, pilot or clearance hole, fixture thickness, bearing surface, driver, tightening method and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Black cabinet hardware | Match the screw to the panel, fitting hole and visible finish. |
|---|---|
| Hinge and bracket attachment | Confirm bearing surface, pilot hole and engagement. |
| Equipment clips and cable supports | Review clamp area, head clearance and substrate. |
| OEM counted hardware packs | Control screw identity, count, labels and protection. |
Buyer Guide
| What head data are required? | Specify head diameter, height, crown, bearing face and recess. |
|---|---|
| How is the pilot hole selected? | Use the production substrate, thread form, engagement and approved trial. |
| Can the pictured size define production? | No. Confirm dimensions and tolerances by drawing, sample or purchase specification. |
| Can black color identify the finish? | No. Confirm the process, color tolerance and corrosion requirement. |
Quality Control
| Head and recess | Inspect diameter, height, crown, bearing face, recess and edges. |
|---|---|
| Thread and point | Check form, pitch, length, point geometry and damage. |
| Installation trial | Verify driving, seating, engagement and the buyer-specified test. |
| Pack audit | Confirm variant identity, finish, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| What head data are required? | Specify head diameter, height, crown, bearing face and recess. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, point and dimensions |
| RFQ 3 | Substrate, pilot hole, fixture and engagement |
| RFQ 4 | Material, finish and corrosion requirement |
| RFQ 5 | Installation method and acceptance criteria |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
