Yellow-Toned Washer-Head Timber Screw — Long yellow-toned timber screws shown with broad integral washer heads, cross drives, smooth upper shanks, coarse lower threads and pointed ends. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Long yellow-toned timber screws shown with broad integral washer heads, cross drives, smooth upper shanks, coarse lower threads and pointed ends. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Yellow-Toned Washer-Head Timber Screw |
|---|---|
| Current Product Configuration | Long yellow-toned timber screws shown with broad integral washer heads, cross drives, smooth upper shanks, coarse lower threads and pointed ends. |
| Primary Form | Washer-head partial-thread timber screw intended to provide a broad bearing area while drawing confirmed wood members or hardware together. |
| Head / Interface | Confirm washer-head diameter and thickness, top profile, drive type and depth, bearing face, under-head transition and tool clearance. |
| Thread / Mating Part | Confirm diameter, coarse thread form and pitch, threaded length, smooth-shank length, point geometry, pilot hole, timber and engagement. |
| Current Appearance | Yellow-toned metallic finish is shown; confirm base material, coating system, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm timber species and condition, member and hardware thicknesses, joint section, pilot and clearance holes, edge distances, driver and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Timber frame joints | Coordinate washer bearing, clamp section and thread engagement. |
|---|---|
| Wood-to-metal connectors | Confirm connector hole, head seating, timber and pilot hole. |
| Structural wood fixtures | State joint geometry and buyer-specified installation test. |
| OEM timber-fastener packs | Control variants, count, labels and surface protection. |
Buyer Guide
| Why use a washer head? | Confirm the required bearing area, connector hole and seating condition for the actual joint. |
|---|---|
| How are thread and shank lengths selected? | Use the member thicknesses, clamp section, timber engagement and approved drawing. |
| Does the pictured finish define outdoor performance? | No. Confirm coating process, exposure and corrosion requirement. |
| Can the photographed size define production? | No. Confirm all dimensions by drawing, sample or purchase specification. |
Quality Control
| Washer head and drive | Inspect diameter, thickness, bearing face, recess and visible defects. |
|---|---|
| Shank, thread and point | Check lengths, straightness, transitions, thread form and point. |
| Timber-joint trial | Verify holes, driving, bearing, clamping, seating and buyer-specified test. |
| Finish and pack audit | Confirm color, surface, variant identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Why use a washer head? | Confirm the required bearing area, connector hole and seating condition for the actual joint. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Washer head, drive, shank, thread, point and dimensions |
| RFQ 3 | Timber species, member and connector thicknesses |
| RFQ 4 | Pilot and clearance holes and installation method |
| RFQ 5 | Material, coating and corrosion requirement |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
