Black Cross-Drive Pan Head Wood Screw — Black screws shown with rounded pan heads, cross drives, coarse full-length threads and pointed ends in several photographed proportions. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black screws shown with rounded pan heads, cross drives, coarse full-length threads and pointed ends in several photographed proportions. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Pan Head Wood Screw |
|---|---|
| Current Product Configuration | Black screws shown with rounded pan heads, cross drives, coarse full-length threads and pointed ends in several photographed proportions. |
| Primary Form | Pan-head wood screw intended to bear on a bracket or fixture while the pointed coarse thread engages a confirmed wood-based substrate. |
| Head / Interface | Confirm pan-head diameter and height, top radius, cross-drive type and depth, bearing face, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm diameter, wood-screw thread form and pitch, threaded length, point geometry, pilot hole, substrate and required engagement. |
| Current Appearance | Black surface finish is shown; confirm base material, finish system, color or gloss range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm fixture hole, substrate material and thickness, joint stack, pilot hole, edge distance, driver, seating condition and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Black furniture brackets | Match head bearing area, fixture hole and visible finish. |
|---|---|
| Cabinet hardware installation | Confirm substrate, pilot hole, engagement and driver access. |
| Interior wood fixtures | Coordinate black color, seating and surrounding hardware. |
| OEM mixed-length packs | Control variant identity, count, labels and compartment layout. |
Buyer Guide
| Which fixture data are required? | Provide fixture-hole diameter, thickness, seating surface and clearance around the pan head. |
|---|---|
| How is the thread selected? | Match thread and point to the substrate, pilot hole, engagement and approved installation trial. |
| Does black appearance define the finish? | No. Confirm finish process, color or gloss and corrosion requirement with an approved sample. |
| Are the photographed proportions fixed? | No. Confirm dimensions and tolerances by drawing, sample or purchase specification. |
Quality Control
| Pan head and drive | Inspect diameter, height, radius, recess, bearing face and burrs. |
|---|---|
| Thread and point | Check form, pitch, length, point, straightness and damage. |
| Fixture-and-wood trial | Verify pilot hole, driving, seating, engagement and buyer-specified test. |
| Finish and pack audit | Confirm black appearance, variant identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which fixture data are required? | Provide fixture-hole diameter, thickness, seating surface and clearance around the pan head. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Pan head, drive, thread, point and dimensions |
| RFQ 3 | Fixture hole and joint stack |
| RFQ 4 | Substrate, pilot hole and installation method |
| RFQ 5 | Material, black finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
