Cross-Drive Countersunk Wood Screw — Yellow-toned pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Yellow-toned pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Countersunk Wood Screw |
|---|---|
| Current Product Configuration | Yellow-toned pointed screws shown with flat countersunk heads, cross recesses and coarse full-length threads. |
| Primary Form | Wood screw intended to seat flush in a confirmed timber, wood-based panel or furniture-hardware joint. |
| Head / Interface | Confirm countersunk-head diameter, angle and height, cross-drive type and depth, bearing transition, recess and driver access. |
| Thread / Mating Part | Confirm thread diameter and form, pitch, threaded length, point geometry, pilot-hole requirement, timber engagement and edge distance. |
| Current Appearance | Yellow-toned metallic surface is shown; confirm base material, finish process, appearance range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm timber or panel species and condition, thickness, pilot hole, fixture stack, countersink, edge distance, driver and buyer-specified installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Furniture bracket fastening | Coordinate screw geometry, bracket hole and wood panel. |
|---|---|
| Cabinet panel assembly | Confirm countersink, pilot hole and edge distance. |
| Joinery and trim fastening | Match head seating and engagement to the approved joint. |
| OEM wood-screw packs | Control thread variants, count, labels and finish protection. |
Buyer Guide
| Which wood or panel data are required? | Provide material, grade where relevant, thickness, pilot hole, edge distance and joint section. |
|---|---|
| How is the countersunk head approved? | Confirm angle, diameter, recess and finished seating surface by drawing or sample. |
| Can the photographed size define production? | No. Confirm every dimension and tolerance by drawing, sample or purchase specification. |
| Can a load value be inferred from the image? | No. State the complete joint and buyer-specified test method. |
Quality Control
| Head and cross drive | Inspect angle, diameter, recess, seating face and burrs. |
|---|---|
| Wood thread and point | Check diameter, form, pitch, length, straightness, point and damage. |
| Wood-joint trial | Verify pilot-hole entry, seating, engagement and buyer-specified test. |
| Finish and pack audit | Confirm surface, item identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which wood or panel data are required? | Provide material, grade where relevant, thickness, pilot hole, edge distance and joint section. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread and point specification |
| RFQ 3 | Timber or panel material and thickness |
| RFQ 4 | Pilot hole, countersink, joint stack and installation |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
