Hex-Socket Countersunk Furniture Screw — Pointed coarse-thread screws shown with countersunk heads, internal hex drives and silver or yellow-toned metallic appearances. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Pointed coarse-thread screws shown with countersunk heads, internal hex drives and silver or yellow-toned metallic appearances. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Hex-Socket Countersunk Furniture Screw |
|---|---|
| Current Product Configuration | Pointed coarse-thread screws shown with countersunk heads, internal hex drives and silver or yellow-toned metallic appearances. |
| Primary Form | Furniture screw intended to seat flush in a confirmed cabinet, panel or furniture-hardware joint after substrate and hole review. |
| Head / Interface | Confirm countersunk-head diameter, angle and height, hex-socket size and depth, bearing transition, driver access and surrounding recess. |
| Thread / Mating Part | Confirm thread diameter and form, pitch, threaded length, point geometry, pilot-hole requirement, panel engagement and edge distance. |
| Current Appearance | Silver and yellow-toned metallic examples are shown; confirm base material, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and thickness, pilot-hole diameter and depth, fixture or bracket stack, countersink, driver, edge distance and buyer-specified assembly test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Cabinet connector installation | Coordinate screw geometry, panel hole and connector fitting. |
|---|---|
| Furniture panel assembly | Confirm panel material, edge distance and countersink. |
| Bracket-to-panel fastening | Match the head envelope, fitting hole and engagement. |
| OEM furniture-screw packs | Control finish variants, counts, labels and surface protection. |
Buyer Guide
| Which panel data are required? | Provide material, thickness, pilot hole, edge distance and joint section. |
|---|---|
| How is the countersunk head approved? | Confirm head angle, diameter, recess and seating surface by drawing or sample. |
| Can silver and yellow-toned finishes be mixed? | Define each finish, quantity, item code and packaging group in the approved specification. |
| Can installation performance be inferred from the image? | No. State the substrate, hole, joint and buyer-specified test method. |
Quality Control
| Head and hex socket | Inspect angle, diameter, height, socket size, depth, seating face and burrs. |
|---|---|
| Coarse thread and point | Check diameter, form, pitch, length, straightness, point and damage. |
| Panel installation trial | Verify entry, seating, engagement, driver access and buyer-specified test. |
| Finish and pack audit | Confirm variant, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which panel data are required? | Provide material, thickness, pilot hole, edge distance and joint section. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, hex drive, thread and point specification |
| RFQ 3 | Panel material, thickness and pilot hole |
| RFQ 4 | Fixture stack, countersink and installation method |
| RFQ 5 | Material, finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
